Online Diagnostics (EMS and STM) Administrator's Guide March 2012

Figure 10 Monitoring Test Progress (xstm Interface)
The color of the device on the device map changes when the test is complete. Table 4-1
describes the significance of each color.
Table 20 Test Results (xstm Interface)
DescriptionColor
Indicates that the test completed successfully and that the device is functioning
properly.
Green
Indicates that the test is not complete and that the device might have problems.Yellow
Indicates that the test is complete but that the device failed the test.Red
5. If the device failed the test, select the device and select Tools->Tool name->Failure Log.
The cause of the failure is displayed, as shown in Figure 4-6.
52 Administering the Support Tools Manager