Event Information Tools: IPMI Event Viewer Command Line Interface

-x <hexevent>
Decodes a specific event by specifying the value as 2 64-bit
numbers.
-k|-r|-t|-v [<logentry>]
Reports format by keyword (k) (default), raw hex (r), text (t),
or verbose problem/cause/action data (v). You can go between
formats in an interactive session. The choices are mutually
exclusive on the command line.
The verbose option (v) also allows specification of a
single log entry with the -d option. Event numbers are shown in the
keyword, text, and verbose log file formats.
-a <level>|-c<cell>
Filters options for cell number (c) or by alert level (a),
which may be one of the following:
0: Minor Forward Progress
1: Major Forward Progress
2: Informational
3: Warning
5: Critical
7: Fatal
For example, selecting an alert level threshold of 3
selects all events with alert levels of 3 or higher.
-p <platform>
Type of machine from which the events were generated. The
file will be scanned for this information if not entered.
Valid platforms are defined in the event dictionary library
and include the following:
hitachiserverha8500I
hp9000/785/C8000P
hp9000/800/rp3410P
hp9000/800/rp3440P
hp9000/800/rp3440#1P
hp9000/800/rp4410P
hp9000/800/rp4440P
hp9000/800/rp4440#1P
hp9000/800/rp7420P
hp9000/800/rp8420P
hp9000/800/SD16AP
hp9000/800/SD32AP
hp9000/800/SD64AP
hpservercx2600I
hpserverrx1600I
hpserverrx1600I
hpserverrx2600I
hpserverrx2620I
hpserverrx4640I
hpserverrx5630I
hpserverrx5670I
hpserverrx7610I
hpserverrx7620I
hpserverrx8610I
hpserverrx8620I
hpsuperdomeserverSD16AI
hpsuperdomeserverSD32AI
hpsuperdomeserverSD64AI
hpworkstationgx4000I
hpworkstationzx1600I
hpworkstationzx2000I
hpworkstationzx6000I
hpworkstationzx8000I
IntelMPServerI
NECserveru32000I
NOTE: This list will only display if you enter an incorrect platform
type when using the -p command.
-f <file>