EMS Release Notes for HP-UX 11i v1 June 2009 Release

Note: On the HP-UX 11i v1 operating system, Online Diagnostics does not support
tape drives. Although some of the Support Tools Manager (STM) tools may work
with tape drives, they are not supported. The diagnostic tools and utilities that
support these devices are HP StorageWorks Library and Tape Tools (L and TT).
These tools are available at:
http://www.hp.com/support/tapetools
Configuring Hardware Monitoring
The EMS Hardware Monitors are installed at the same time as STM. Once the
monitoring software is installed, monitoring is automatically enabled.
By default, events with severity levels MAJOR WARNING, MINOR WARNING,
SERIOUS, or CRITICAL that are generated by the monitors are notified in the
following ways:
• Written to /var/adm/syslog/syslog.log
• Sent to the superuser's E-mail address.
All events generated by all the monitors are stored in the
/var/opt/resmon/log/event.log file.
To configure, enable, or disable hardware event monitoring, run the
/etc/opt/resmon/lbin/monconfig monitoring request manager.
The Peripheral Status Monitor (PSM) and the Kernel Resource Monitor (krmond) are
configured differently. They use the EMS GUI. For more information, see:
http://www.hp.com/go/hpux-diag-ems-gui-doc
Known Problems
• None
Monitors Provided
For HP-UX 11i v1 June 2009 release, the following monitors are provided:
• AutoRAID Disk Array (armmon)
• Chassis Code Monitor (dm_chassis)
• Core Hardware (dm_core_hw)
• Chassis Event Monitor (ia64_corehw)
• CPU (lpmc_em)
• Disk (disk_em)
• Disk Array FC60 (fc60mon)
• DS2500 Enclosure Monitor (gazemon)
• Fast Wide SCSI Disk Array (fw_disk_array)
• Fibre Channel Adapters (dm_FCMS_adapter)
• Fibre Channel Adapter Model A5158 (dm_TL_adapter)
• Fibre Channel Adapter Model A6826A Monitor (dm_QL_adapter)
• Fibre Channel Arbitrated Loop Hub (dm_fc_hub)
• Fibre Channel Switch (dm_fc_sw)
• Forward Progress Log Monitor (fpl_em)
• High Availability Disk Array (ha_disk_array)
• High Availability Storage System (dm_ses_enclosure)
Release Notes for EMS Hardware Monitors on HP-UX 11i v1 (11.11) (June 2009) 3