EMS Hardware Monitors: Requirements and Supported Products

Supported by: Kernel Resource Monitor
UX 11.0
(B.11.0), both
32 bit and 64 bit
SAM.
System Status (whether the monitored systems
are up and running, and whether they have
Online Diagnostic software installed and
running.)
Supported by: System Status Monitor
NA None
Interface Cards
Product
Model/Product
Number
Special
Requirements
SCSI1, SCSI2 and SCSI3 interface cards on all HP-UX
systems.
Supported by: SCSI Card Monitor
NA None
Other
Product
Model/Product
Number
Special
Requirements
iSCSI
Subsystem
HP-UX
software
solution for
iSCSI protocol
Supported by:
iSCSI
Subsystem
Monitor
NA HPUX 11.23, Patch PHSS_30041 for
IA1123(11.23)
Codename: iHOP
For product support information, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://www.hp.com/go/hpux-diagnostics-
docs
HP Storage
Array
Supported by:
Remote
Monitor
As of July 13, 2000:
HP A6188A storage
array
HP A6189A storage
array
HP A6218A storage
array
As of January 2003:
HP A6189B storage
array
HP-UX 11.xx, Sept 2000 or later
TCP/IP port 2818 must be available
HP UPSs
(Uninterruptible
Power Systems)
HP PowerTrust
A2941A (600VA)
A2994A (1300VA)
The HP-UX monitoring daemon
ups_mond, which is shipped on all Series
800 systems (not shipped on S700