EMS Hardware Monitors: Requirements and Supported Products

Supported by SAS Mass Storage Adapter
Monitor (dm_sas_adapter)
http://itrc.hp.com
For the documentation of the monitor, see:
http://www.hp.com/go/hpux-diagnostics-docs
Fibre Channel Arbitrated Loop Hubs
Product
Model/Product
Number
Special
Requirements
HP Fibre Channel
Arbitrated Loop Hubs
Supported by: Fibre
Channel Arbitrated
Loop Hub Monitor
A3724A
A4839A
The FC-AL Hub monitor requires:
Device Firmware revisions
Device Agent Firmware revision 2.14 or
greater
Hub Controller Firmware revision 3.06 or
greater
Firmware and installation instructions are
available at
http://www.hp.com/go/softwaredepot
C++ runtime support patches
11.00 PHSS_16587 (supersedes
PHSS_14577)
Before using the hub monitor, edit the monitor
configuration file
(/var/stm/config/tools/monitor/dm_fc_hub.cfg)
to indicate what hubs will be monitored.
Fibre Channel Switches
Product
Model/Product
Number
Special
Requirements
HP Fibre
Channel
Switches
Supported by:
Fibre Channel
Switch Monitor
A5223A and
A5224A
The FC Switch monitor requires:
C++ runtime support patches
11.00 PHSS_16587 (supersedes PHSS_14577)
Before using the hub monitor, edit the monitor
configuration file
(/var/stm/config/tools/monitor/dm_fc_sw.cfg) to
indicate what switches will be monitored.
Memory
Product
Model/Product
Number
Special
Requirements
All of system memory on PA-RISC based systems. NA None