EMS Hardware Monitors: Requirements and Supported Products

Modular SAN array 30
Supported by: HP
Storage Works Modular
SAN array 1000/30
Monitor
HP Storage
Works Modular
SAN array 30
A6795A (2 Gbps, 64-bit 66 MHz
PCI)
A6826A (2 Gbps, 64-bit PCI Dual
Channel)
Starting with HP-UX 11i June 2004 release
and HP-UX 11i V2 September 2004 release
of OnlineDiag, MSA 1000 is supported on
the following cards :
A9782A (2 Gbps, 64-bit PCI Dual
Channel combo)
A9784A (2 Gbps, 64-bit PCI Dual
Channel combo)
Disk Products
Product
Model/Product
Number
Special
Requirements
All disks bound to the sdisk and disc30
drivers and not under the control of another
event monitor (such as a disk array
monitor).
Hitachi XP256, XP512, XP128, and
XP1024 drives and EMC Symetrix drives
are not supported, since these drives have
their own monitoring.
Supported by: Disk Monitor
NA None
Tape Products
All the tape products in the following table are monitored by the SCSI Tape Devices Monitor
.
IMPORTANT: The HP StorageWorks SDLT 160/320 GB Tape Drive and the HP Ultrium 460 External Tape Drive
are not supported by the OnlineDiag product. Some STM tools may function, but again, these tools are not
supported. The diagnostics tools and utilities that support these devices is HP StorageWorks Library and Tape Tools
(L&TT). These tools can be downloaded free of charge at:
http://www.hp.com/support/tapetools
IMPORTANT: Users must disable this monitor during a backup. There is a chance that the EMS polling will
interfere with the backup.
Note that support for many devices was added in the March 2000 (IPR 0003) and June 2000 (IPR 0006) release of
STM.
Product
Model/Product
Number
Special
Requirements
DDS-2 Autoloader A3400A None
DDS-3 Autoloader A3716A None
DDS-4 Autoloader
C6370A, C6371A Mar 00