EMS Hardware Monitors: Requirements and Supported Products

ManualsBrandsHP ManualsSoftwareHP-UX Online Diagnostics Software

Requirements and Supported Products

This page lists the Hewlett-Packard products currently supported by EMS hardware monitors. The page also

identifies any patches or software required for using the EMS hardware monitor with the product.

Disk Arrays

Disk Products

Tape Products

High Availability Storage Systems

Fibre Channel SCSI Multiplexers

Fibre Channel Adapters

Fibre Channel Arbitrated Loop Hubs

Fibre Channel Switches

Memory

System

Interface Cards

Other

Disk Arrays

Product

Model/Product

Number

Special

Requirements

HP AutoRAID Disk

Array

Supported by: AutoRAID

Disk Array Monitor

12H

Requires the following ARMServer

versions:

HP-UX 11.00 (Patch PHCO_23262)

HP-UX 11.11 (Patch PHCO_23263)

HP High Availability

Disk Array

Supported by: High-

Availability Disk Array

Monitor

30/FC

None

HP Fast/Wide SCSI Disk

Array

Supported by: Fast/Wide

SCSI Disk Array Monitor

C243XHA None

HP Fibre Channel High

Availability Disk Array

(Model 60/FC)

Supported by: Disk Array

FC60 Monitor

HP SureStore E

Disk Array

FC60

11.00 PHCO_26823

11.11 PHCO_26824

HP Storage Works

Modular SAN array 1000

HP Storage Works

HP Storage

Works Modular

SAN array 1000

Starting with HP-UX 11i V2 March 2004

release of OnlineDiag, MSA 1000 is

supported on the following cards:

Summary of content (9 pages)

PAGE 1
Requirements and Supported Products This page lists the Hewlett-Packard products currently supported by EMS hardware monitors. The page also identifies any patches or software required for using the EMS hardware monitor with the product.
PAGE 2
Modular SAN array 30 Supported by: HP Storage Works Modular SAN array 1000/30 Monitor HP Storage Works Modular SAN array 30 A6795A (2 Gbps, 64-bit 66 MHz PCI) A6826A (2 Gbps, 64-bit PCI Dual Channel) Starting with HP-UX 11i June 2004 release and HP-UX 11i V2 September 2004 release of OnlineDiag, MSA 1000 is supported on the following cards : A9782A (2 Gbps, 64-bit PCI Dual Channel combo) A9784A (2 Gbps, 64-bit PCI Dual Channel combo) Disk Products Product All disks bound to the sdisk and disc30 drivers a
PAGE 3
Release DLT4000 4/48 Library; HP-UX; Differential SCSI A3544A None DLT4000 2/48 Library; HP-UX; Differential SCSI A3545A None DLT4000 2/28 Library; HP-UX; Differential SCSI A3546A None DLT 4000 & 7000; 2/28; Drives Differential; Robotics SE/Diff A4850A None DLT 4000 & 7000; 4/48; Drives Differential; Robotics SE/Diff A4855A None DLT 4000 & 7000; 15 slot; Deskside/Rack; Differential A4851A None DLT 4000 & 7000; 588 slot; Drives Diff; Robotics SE A4845A None DLT 4000 & 7000; 100 slot; Dri
PAGE 4
DDS-2 Autoloader DDS-3 Autoloader DLT 4000 & 7000; HP Surestore Tape Libary Model 2/28 DLT 4000 & 7000; HP Surestore Tape Library Model 4/48 DLT 4000 & 7000; 588 slot; Drives Diff; Robotics SE DLT 4000 & 7000; 100 slot; Drives Diff; Robotics SE DLT 4000 & 7000; 30 slot; Differential As of the March 2000 release (IPR 0003), the monitor also supports the following devices: DDS-4 Autoloader DLT7000 HP Surestore Tape Autoloader Model 1/9 DLT8000 HP Surestore Tape Autoloader Model 1/9 DLT8000 HP Surestore Tape L
PAGE 5
Supported by: High-Availability Storage System Monitor Fibre Channel SCSI Multiplexers Product Model/Product Number Special Requirements A3308A Firmware version 3840 HP Fibre Channel SCSI Multiplexer Supported by: Fibre Channel SCSI Multiplexer Monitor Fibre Channel Adapters Product HP Fibre Mass Storage Channel Adapters Supported by: Fibre Channel Adapters Monitor (dm_FCMS_adapter) Model/Product Number A3404A A3591A A3636A A3740A Special Requirements The following driver revisions are required: B.
PAGE 6
Supported by SAS Mass Storage Adapter Monitor (dm_sas_adapter) http://itrc.hp.com For the documentation of the monitor, see: http://www.hp.com/go/hpux-diagnostics-docs Fibre Channel Arbitrated Loop Hubs Product Model/Product Number HP Fibre Channel Arbitrated Loop Hubs A3724A A4839A Special Requirements The FC-AL Hub monitor requires: Device Firmware revisions Supported by: Fibre Channel Arbitrated Loop Hub Monitor Device Agent Firmware revision 2.14 or greater Hub Controller Firmware revision 3.
PAGE 7
Supported by: Memory Monitor Itanium Memory Monitor: monitor for all of system memory on Itanium-based systems. NA HP-UX 11.22 OS or later. Supported by: Itanium Memory Monitor System Model/Product Number Special Requirements A monitor designed to monitor all system chassis logs. It reads all the chassis logs from the file /var/stm/logs/os/ccbootlog. Supported by: Chassis Code Monitor Superdome S-Class For HP-UX 11.11 OS only. The chassis code logging daemon (cclogd) must be up and running.
PAGE 8
Supported by: Kernel Resource Monitor SAM. UX 11.0 (B.11.0), both 32 bit and 64 bit System Status (whether the monitored systems are up and running, and whether they have Online Diagnostic software installed and running.) NA None Supported by: System Status Monitor Interface Cards Model/Product Special Number Requirements Product SCSI1, SCSI2 and SCSI3 interface cards on all HP-UX systems.
PAGE 9
Supported by: UPS Monitor A2996B (1.3kVA) A2997B (1.8kVA) A2998B (3.0kVA) A3589B (5.5kVA) HP PowerTrust II-LR A1353A (2.0kVA 120V) A1354A (2.0kVA 240V) A1356A (3.0kVA 240V) HP PowerTrust II-MR A6583A (4.0kW 240V) A6584A (6.5kW 240V) A6585A (8.0kW 240V) Top of Page / http://www.hp.