Release Notes for IPF Systems March 2010 Release

The COPYUTIL tool does not support the Agilent FC cards.
DFDUTILU
The DFDUTILU tool supports up to 4096 devices.
ESCADIAG
The section 3 may fail in a cellular system with 16 cells and fully loaded with 16 PCI-X I/O chassis.
IODIAG
QXCR1000585287 (JAGag39775), QXCR1000585265 (JAGag39740)
There are known defects with the EFI driver for the AD299A, AD355A, AD221A, AD222A, and AD393A
controllers when attached to peripherals. While running a test using the IODIAG tool, the IODIAG tool prints
the debug output in the form of hex dumps. Also, the IODIAG tool encounters intermittent traps and hangs. HP
recommends that you test these devices without attaching the controllers. You can obtain the fix for this defect
after the release of the EFI drivers for the controllers.
QXCR1000585447 (JAGag39989)
Due to an EFI driver issue on the AD338A GigE adapter, the section 2 of the IODIAG tool fails displaying the
following error message when the LAN cable is connected to the adapter:
EFI_DEVICE_ERROR
Due to an EFI driver issue on the AB287A 10GigE adapter, section 2 of the IODIAG tool fails on the following
servers:
rx8640 server
rx7640 server
SD16B server
SD32B server
SD64B server
The AB287A 10GigE adapter is shipped with EFI driver version 1.1.3.0. On rx8640, rx7640, SD16B, SD32B,
and SD64B servers, the EFI driver version 1.1.3.0 may cause section 2 of the IODIAG tool to fail. These failures
occur while using the IODIAG tool from the following Offline Diagnostics CD media:
IPF0512
IPF0603
IPF0606
IPF0609
IPF0612
IPF0703
IPF0706
IPF0709
IPF0712
IPF0803
IPF0806
IPF0809
IPF0812
IPF0903
IPF0906
IPF0909
IPF0912
The following error message is displayed:
SECTION 002
Running Extended Vendor Provided Test