Offline Diagnostics Environment Administrator's and User's Guide

Example 4-10 Using the diskexpt2 Command
ODE> diskexpt2
Type HELP for command information.
***************************************************************************
****** ******
****** DISKEXPT2 ******
****** ******
****** Copyright (C) Hewlett-Packard Co. 1998 thru 2006 ******
****** All Rights Reserved ******
****** ******
****** This program may only be used by HP support personnel and ******
****** those customers with the appropriate Class license or ******
****** Node license for systems specified by the license. HP ******
****** shall not be liable for any damages resulting from misuse ******
****** or unauthorized use of this program. This program ******
****** remains the property of HP. ******
****** ******
****** Version B.00.27 ******
****** ******
***************************************************************************
Enter password or a <cr> to exit:
The bus is being scanned for devices. Please wait.
More than 3 Modules/Busses were found on this system.
Since mapping all the Busses will take time, you can
choose a range of busses to map or press <return> to
map all the busses. For example, to map bus 2, 4, 5,
and 6, type the range 2,4/6
Indx Path Module Bus HPA SPA
---- --------------- ---------- ------ -------- --------
0 0/1/1/0 PCI SCSI SCSI 200800 0
1 0/1/1/1 PCI SCSI SCSI 200900 0
2 0/2/1/0 PCI RAID160 SCSI 400800 0
3 0/4/1/0/4/0 PCI FCQL Fibre 812000 0
Enter a range (? for help, q for quit)<default is map all>:
The bus is being scanned for devices. Please wait.
Sel/
Indx Path Product String Rev Bus Size
---- --------------------- ----------------------------------- ------ ------ ------
0 0/1/1/0.1.0 HP 36.4G ST336753LC HPC3 SCSI 36.4 GB
1 0/1/1/1.0.0 HP 36.4G ST336753LC HPC3 SCSI 36.4 GB
Legend:
Sel/Indx - Indx of the disk listed. This is flagged with a '*'
if it is marked for testing.
NOTE:
The size of disk may not match the Information Specified by
the vendor due to difference in calculation methods.
DISKEXPT2> help
DISKEXPT2 Help
-------------------------------------------------------------------------------
Quick Start on Utility.
---------------------
UTILINFO A brief procedure on how to use the utility.
Environment variables:
---------------------
SHOWENV Displays the current settings for TESTDISK, BLOCK and RANGE.
BLOCK Selects the block to be tested.
RANGE Selects range of blocks to be tested by the ROMT and WRTMT commands.
TESTDISK Selects the disk to be tested.
Read & Writing Disk Blocks:
--------------------------
SHOWBUF Displays the internal buffer contents after the last read command.
READBLK Reads the given block from the given SCSI disk.
READFULL Reads the given block with the header from the given SCSI disk.
WRITEBLK Writes the given block on to the given disk.
WRITEFULL Writes the given block with the header on to the given disk.
Media Tests:
-----------
ROMT Performs a read media test on the selected range of blocks.
WRTMT Performs a write/read/verify test on the selected range of blocks.
Continue ([y]/n)? y
-------------------------------------------------------------------------------
Disk Log Access:
---------------
ACCESSLOG Displays the disk logs in a consise format.
READLOG Reads the log data from the disk.
CLRLOG Clears the log data from the disk.
Running ODE Tools on HP 9000 Systems 33