HP Storage Provisioning Manager (SPM) User Guide (5992-5070, March 2010)

4. If desired, click the Refresh from Array button to update the data displayed.
NOTE:
There may be a 30 minute delay between the time a volume configuration change is made
on the array and when the information is available to SPM because of SMI-S caching delays.
5. Click OK to exit the window.
Modifying presentation settings of an unmanaged volume service
To modify presentation of an unmanaged volume service from SPM:
1. From the Navigation tree, click on Volume Services, then click on the desired volume service in
the List View.
2. Click the Actions Properties button at the bottom of the screen.
The Volume Properties dialog box displays.
3. Select the Presentation tab.
There are three tables in the Presentations window. When a volume is selected (highlighted) in
the Volume Presentations table, information corresponding to that volume is shown in the Presented
to Initiators and Presented by Targets tables.
Click on the desired volume, listed in the Volume Presentations table, to highlight it.
4. Select the box to present the volume; clear the box to save the settings but not present the volume
at this time.
5. To change the LUN number, enter the correct value into the LUN field.
6. Select the appropriate mode (for example HPUX or Linux) from the list in the Host Mode field.
Managing storage catalog entities44