HP Storage Provisioning Manager (SPM) User Guide (5992-5070, March 2010)

6. In the Security tab:
a. To add a group or user, click the Add button that displays below the Group or User Names
table.
The Add Users or Groups dialog box displays.
b. In the Enter User or Group Names field, enter the user or group you would like to add, then
click the Check Names button.
If the user or group name entered is valid, the Add Users or Groups dialog box refreshes to
display the exact syntax of the user or group added. If the user or group name entered is
not valid, the dialog box refreshes to display “Could Not Find User” in red text beneath the
Enter User or Group Names field. Retry the entry.
c. Click OK to add the user or group name to the Group or User Names table.
d. Highlight the user or group in theGroup or User Names table, in the Permissions table, scroll
through the list of permissions and select the box(es) in the Granted column for all permission
types to grant to the user.
e. Repeat this procedure for all users or groups to be added at this time.
f. Click OK to save the information, or select another tab to continue configuration.
7. When the configuration is complete, click OK to save the new volume.
Tagging a service group
To add tags to a service group:
1. From the Navigation tree, expand Service Groups, then select the name of the service group.
2. At the bottom of the screen, select the Actions Properties button.
The Service Group Properties dialog box displays.
3. Select the Tags tab.
4. Select the appropriate boxes in the Assigned column to indicate which tags to apply to the service
group.
5. Click the OK button to apply the selected tags.
NOTE:
Tags cannot be created using this procedure. To create new tags, see “Establishing tags” on page 15.
Importing storage into the storage catalog32