vparstatus2.1m (2012 03)

vparstatus2(1M)

For OA Based Partition Management Systems

vparstatus2(1M)

The local virtual partition number is 1.

Display CPU configuration information for a particular CPU:

# vparstatus -d 1/1/0/0

CPU Config Assigned to Sibling Information

path Status Num Name Path Num Name

========= ====== === ==================== ========= === ==============

1/1/0/0 OK 1 vpar1 1/1/0/1 1 vpar1

1/1/0/0 OK 1 vpar1 1/1/0/2 - -

1/1/0/0 OK 1 vpar1 1/1/0/3 - -

ERRORS

OA syslog contains additional description of errors encountered during partition operations. Users can

view the OA syslog from the OA using "SHOW SYSLOG OA" command.

"Error: System unable to accept partition commands"

The above error message is printed out under the following circumstances:

• Attempting to run command from an OA other than the active OA in enclosure 1

• System has been shut down (e.g. with POWEROFF XFABRIC, or ambient overtemp)

• The OA has not ﬁnished initializing.

In the above scenarios, please ensure the system and OA are completely up and you are running the com-

mand from the active OA in enclosure 1.

AUTHOR

vparstatus was developed by the Hewlett-Packard Company.