vparremove2.1m (2010 09)

v
vparremove2(1M)
For OA Based Partition Management Systems
vparremove2(1M)
vparremove -p Norway:Oslo -f
Deletes the virtual partition Oslo from partition specification,
my_spec:
vparremove -p Norway:Oslo -Z my_spec -f
ERRORS
OA syslog contains additional description of errors encountered during partition operations. Users can
view the OA syslog from the OA using "SHOW SYSLOG OA" command.
"Error: System unable to accept partition commands"
The above error message is printed out under the following circumstances:
• Attempting to run command from an OA other than the active OA in enclosure 1
• System has been shut down (e.g. with POWEROFF XFABRIC, or ambient overtemp)
• The OA has not finished initializing.
In the above scenarios, please ensure the system and OA are completely up and you are running the com-
mand from the active OA in enclosure 1.
vparremove displays error messages on standard error for any of the following conditions:
• vpar_id does not exist in the current virtual partition database.
• vpar_id in the current virtual partition database is in some run-state other than DOWN.
• npar_id does not exist.
• The partition from where the command was invoked did not have sufficient
parperm
privileges.
AUTHOR
vparremove was developed by the Hewlett-Packard Company.
SEE ALSO
On OA:
"help parperm", "help vparboot", "help vparcreate", "help vparmodify", "help vparreset", "help vparstatus".
On HP-UX:
parperm(1M), vparboot2(1M), vparcreate2(1M), vparmodify2(1M), vparreset2(1M), vparstatus2(1M).
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2010