termio.7 (2010 09)

t
termio(7) termio(7)
H = One hexadecimal digit (4 bits) which controls diagnostic access and hardware flow control
(HP J2094A only).
Bit Value
h3 Card diagnostic
h2 Port diagnostic
h1 Reserved
h0 Enables RTS/CTS hardware flow control
M = One hexadecimal digit (4 bits) for the port access type. Values for each bit are as follows:
Bit Value
m3 TI/ALP
m2 0 = Simple protocol (U.S.),
1 = CCITT protocol (Europe)
m1m0 00=Direct
01 = Dial-out modem
10 = Dial-in modem
11=Invalid
AUTHOR
termios was developed by HP and the IEEE Computer Society.
termio was developed by HP, AT&T, and the University of California, Berkeley.
FILES
/dev/console
/dev/cua*
/dev/cul*
/dev/tty*
/dev/ttyd*
SEE ALSO
adb(1), shl(1), stty(1), dmesg(1M), kctune(1M), mknod(1M), fork(2), ioctl(2), setpgid(2), setsid(2), sig-
nal(2), stty(2), cfspeed(3C), tcattribute(3C), tccontrol(3C), tcgetpgrp(3C), tcgetsid(3C), tcsetpgrp(3C),
privileges(5), signal(5), unistd(5), modem(7), sttyV6(7), termiox(7), tty(7).
STANDARDS CONFORMANCE
termio: SVID2, SVID3, XPG2
termios: AES, SVID3, XPG3, XPG4, FIPS 151-2, POSIX.1
HP-UX 11i Version 3: September 2010 − 21 − Hewlett-Packard Company 21