swremove.1m (2010 09)
s
swremove(1M) swremove(1M)
If set to false, swremove command proceeds if one or more software selections are
available.
If set to
true, the swremove
command proceeds only if all the software selections are
available.
installed_software_catalog=products
Defines the directory path where the Installed Products Database (IPD) is stored. This
information describes installed software. When set to an absolute path, this option
defines the location of the IPD. When this option contains a relative path, the SD con-
troller appends the value to the value specified by the
admin_directory
option to
determine the path to the IPD. For alternate roots, this path is resolved relative to the
location of the alternate root. This option does not affect where software is installed, only
the IPD location.
This option permits the simultaneous installation and removal of multiple software appli-
cations by multiple users or multiple processes, with each application or group of applica-
tions using a different IPD.
Caution: use a specific
installed_software_catalog
to manage a specific applica-
tion. SD does not support multiple descriptions of the same application in multiple IPDs.
See also the
admin_directory
and run_as_superuser options, which control SD’s
nonprivileged mode. (This mode is intended only for managing applications that are spe-
cially designed and packaged. This mode cannot be used to manage the HP-UX operat-
ing system or patches to it. For a full explanation of nonprivileged SD, see the Software
Distributor Administration Guide, available at the
http://www.hp.com/go/hpux-core-docs
web site.)
job_title=
Specifies an ASCII string giving a title to a job. It is displayed along with the job ID to
provide additional identifying information about a job when swjob is invoked.
loadorder_use_coreqs=true
Controls the handling of corequisites in determining the order in which filesets are
loaded.
If
true, promotes the corequisite of a prerequisite to prerequisite. If
false, core-
quisites are not used in determining load order.
log_msgid=0
Adds numeric identification numbers at the beginning of SD logfile messages:
0 (default) No identifiers are attached to messages.
1 Adds identifiers to ERROR messages only.
2 Adds identifiers to ERROR and WARNING messages.
3 Adds identifiers to ERROR, WARNING, and NOTE messages.
4 Adds identifiers to ERROR, WARNING, NOTE, and certain other informational mes-
sages.
logdetail=false
Controls the amount of detail written to the log file. When set to true, this option adds
detailed task information (such as options specified, progress statements, and additional
summary information) to the log file. This information is in addition to log information
controlled by the loglevel option.
See the
loglevel option and the sd(5) manual page for more information.
logfile=/var/adm/sw/swremove.log
This is the default command log file for the swremove command.
loglevel=1
Controls the log level for the events logged to the command logfile, the target agent
logfile, and the source agent logfile. This information is in addition to the detail con-
trolled by the logdetail option.
0 provides no information to the logfile.
1 enables verbose logging to the log files.
2 enables very verbose logging to the log files.
HP-UX 11i Version 3: September 2010 − 7 − Hewlett-Packard Company 7