swinstall.1m (2011 03)

s
swinstall(1M) swinstall(1M)
are "1.0" (default) and "0.8".
SD object and attribute syntax conforms to the layout_version 1.0 specification of the
IEEE POSIX 1387.2 Software Administration standard. SD commands still accept the
keyword names associated with the older layout version, but you should use
layout_version=0.8
only to create distributions readable by older versions of SD.
See the description of the
layout_version
option in sd(5) for more information.
loadorder_use_coreqs=true
Controls the handling of corequisites in determining the order in which filesets are
loaded.
If
true, promotes the corequisite of a prerequisite to prerequisite. If
false
, core-
quisites are not used in determining load order.
logdetail=false
Controls the amount of detail written to the logfile. When set to
true, this option adds
detailed task information (such as options specified, progress statements and additional
summary information) to the logfile. This information is in addition to log information
controlled by the
loglevel option.
See
loglevel=1 and the sd(5) manual page by typing
man5sdfor more informa-
tion.
logfile=/var/adm/sw/swinstall.log
This is the default command log file for the swinstall command.
loglevel=1
Controls the log level for the events logged to the command logfile, the target agent
logfile, and the source agent logfile. This information is in addition to the detail con-
trolled by the
logdetail option. (See logdetail=false
and the sd(5) manual
page for more information.) A value of:
0 provides no information to the logfile.
1 enables verbose logging to the logfiles.
2 enables very verbose logging, including per-file messages, to the logfiles.
log_msgid=0
Adds numeric identification numbers at the beginning of SD logfile messages:
0 (default) No identifiers are attached to messages.
1 Adds identifiers to ERROR messages only.
2 Adds identifiers to ERROR and WARNING messages.
3 Adds identifiers to ERROR, WARNING, and NOTE messages.
4 Adds identifiers to ERROR, WARNING, NOTE, and certain other informational mes-
sages.
lookupcache_timeout_minutes=10
Controls the time in minutes to cache and re-use the results of hostname or IP address
resolution lookups. A value of 0 disables the facility to cache and re-use lookup results.
The maximum value allowed is 10080 minutes, which is one week.
A value of:
0 disables the lookup caching mechanism.
10080 is the maximum value allowed.
match_target=false
(Applies only to swinstall.) If set to true, software selection is done by locating
filesets on the source that match the target system’s installed filesets. If multiple targets
are specified, the first target in the list is used as the basis for selections.
max_targets=25
When set to a positive integer, SD limits the number of concurrent install or copy opera-
tions to the number specified. As each copy or install operation completes, another target
is selected and started until all targets have been completed.
Server and network performance determines the optimal setting; a recommended start-
ing point is 25 (the default value). If you set this option to a value of less than one, SD
attempts to install or copy to all targets at once.
12 Hewlett-Packard Company − 12 − HP-UX 11i Version 3: March 2011