scsimgr.1m (2011 03)

s
scsimgr(1M) scsimgr(1M)
scsimgr activate -D /dev/rdisk/disk47
To activate all LUN paths in standby state to active/optimized state for LUN associated with the LUN
path having hardware path 0/4/1/0.0x50001fe1500170b9.0x401a000000000000
:
scsimgr activate -H 0/4/1/0.0x50001fe1500170b9.0x401a000000000000
WARNINGS
The following actions may affect interoperability with certain devices or proper operation of the system.
They should be done only by an experienced user. HP recommends that you consult your HP support
representative before performing these actions.
• Activating (
activate command) LUN paths in standby state or active non-optimized state for dev-
ices with asymmetric access.
• Adding (
ddr_add command) or deleting (
ddr_del command) settable attribute scopes for a
driver.
• Changing attribute values (
set_attr or
save_attr commands) at a registered settable attribute
scope for a driver.
AUTHOR
scsimgr was developed by Hewlett-Packard Company.
SEE ALSO
diskinfo(1M), fcmsutil(1M), io_redirect_dsf(1M), ioscan(1M), scsictl(1M), autochanger(7), intro(7), scsi(7),
scsi_ctl(7), scsi_disk(7), scsi_tape(7), scsimgr_eschgr(7), scsimgr_esdisk(7), scsimgr_estape(7),
scsimgr_fcd(7).
Note: The manpage of a driver plug-in for scsimgr is scsimgr_ <driver_name >(7), where
<driver_name > is the name of the driver. For example, see scsimgr_esdisk(7).
HP-UX 11i Version 3: March 2011 − 27 − Hewlett-Packard Company 27