scsimgr.1m (2011 03)

s
scsimgr(1M) scsimgr(1M)
scsimgr ddr_add -N ’/escsi/esdisk/0x0/HP /ST39103FC’
To delete a settable attribute scope for disk devices from HP with product identifier "ST39103FC" bound
to driver esdisk. It will no longer be possible to modify default attributes values for these devices only:
scsimgr ddr_del -N ’/escsi/esdisk/0x0/HP /ST39103FC’
To list settable attribute scopes registered for all drivers:
scsimgr ddr_list
To generate a settable attribute scope covering LUN disk20 and including elements down to the product
identifier:
scsimgr ddr_name -D /dev/rdisk/disk20 pid
To validate replacement of disk0 and re-assign its DSF to the replacing LUN:
scsimgr replace_wwid -D /dev/rdisk/disk0 dsf
To unbind all LUN paths that were associated with
disk0:
scsimgr replace_wwid -D /dev/rdisk/disk0
To validate change of LUN associated with LUN path with class
lunpath and instance number 2:
scsimgr replace_wwid -C lunpath -I 2
To validate change of LUN to which legacy DSF /dev/rdsk/c0t5d0
is bound to:
scsimgr replace_leg_dsf -D /dev/rdsk/c0t5d0
To force reset of LUN disk0:
scsimgr -f lun_reset -D dev/rdisk/disk0
To cause a warm target reset of device corresponding to
disk0:
scsimgr warm_bdr -D dev/rdisk/disk0
To cause a cold target reset of device corresponding to
disk0:
scsimgr cold_bdr -D dev/rdisk/disk0
To disable LUN path with the hardware path
0/4/1/0.0x60060b000014f45a.0x4001000000000000
:
scsimgr disable -H 0/4/1/0.0x60060b000014f45a.0x4001000000000000
To enable disk0:
scsimgr enable -D /dev/rdisk/disk0
To set user friendly device identifier for LUN of class disk and instance 7:
scsimgr set_devid -C disk -I 7 "Disk with Credit Card information"
To get user friendly device identifier for LUN of class disk and instance 7:
scsimgr get_devid -C disk -I 7
To sync write data cache on LUN with DSF /dev/rdisk/disk47:
scsimgr sync_cache -D /dev/rdisk/disk47
To forcefully pre-erase the medium of the magneto-optical device with hardware path
64000/0xfa00/0x6:
scsimgr erase -H 64000/0xfa00/0x6
To display standard inquiry data for LUN with DSF /dev/rdisk/disk47:
scsimgr inquiry -D /dev/rdisk/disk47
To display vital product data of page 83 of LUN disk23:
scsimgr inquiry -C disk -I 23 0x83
scsimgr inquiry -C disk -I 23 wwid
To activate all LUN paths in standby state to active/optimized state for LUN with DSF
/dev/rdisk/disk47:
26 Hewlett-Packard Company − 26 − HP-UX 11i Version 3: March 2011