scsimgr.1m (2011 03)

s
scsimgr(1M) scsimgr(1M)
Firmware revision of the con-
troller
firmware_rev RO string
Current configured link speedcur_speed RO string
max_speed RO string Maximum link speed
Capabilities of Controller. The
controller can have no capabilities
("none") or a combination of the
following capabilities:
boot: able to be used for boot.
dump: able to be used for dump.
Note: Utilizing the capabilities of
the controller depends upon the
support from the SCSI devices
connected to the controller.
capability RO string
To enable/disable auto scan of
devices at HBA scope. This value
overrides the value set at global
scope. Values: false (0) or true
(1).
auto_scan_enable RW boolean
Maximum number of internally
generated high priority I/Os per
controller. This value overrides
the value set at global scope.
max_internal_hipri RW uint32
Maximum number of lunpaths to
scan simultaneously per target.
This value overrides the value set
at global scope.
max_lpt_scan RW uint32
User-friendly name that can be
substituted for the HBA’s
hardware path. By default, no
value is pre-assigned (empty
string). Range: ASCII string <=
128 chars. Must begin with a
letter and may only contain
alphanumeric characters, "-", and
"_".
hwp_abs_alias RW string
User-friendly name that can be
substituted for the HBAs com-
ponent part of its hardware path.
By default, no value is pre-
assigned (empty string). Range:
ASCII string <= 64 chars. Must
begin with a letter and may only
contain alphanumeric characters,
"-", and "_".
hwp_comp_alias RW string
Object Attribute Name RO/RW Type Description
Maximum queue depth assigned
to the target port of the target
path. Note: This attribute is only
valid when
tport_qdepth_enable has
been set to true (1).
Range: 1 - 0xFFFFFFFE
Device Set tport_max_qdepth RW uint32
tport_
qdepth_enable
To enable/disable congestion con-
trol on the target port of the tar-
get path. Values: false (0) or true
RW boolean
HP-UX 11i Version 3: March 2011 21 Hewlett-Packard Company 21