scsimgr.1m (2010 09)

s
scsimgr(1M) scsimgr(1M)
Object Attribute Name RO/RW Type Description
Instance number of the enclosure.Enclosure instance RO uint32
Vendor identifier associated with
the enclosure.
vid RO string
Product identifier associated with
the enclosure.
pid RO string
binary/
ascii
string
encl_id RO Enclosure identifier.
encl_alias RO string Enclosure alias name.
Object Attribute Name RO/RW Type Description
HBA state RO string State of the controller
device_file RO string DSF of the controller
class RO string Class of the controller
instance RO uint32 Instance of the controller
Hardware path of the controllerhw_path RO string
Total number of LUN paths for
this controller
lpt_cnt RO uint32
Total number of target paths for
this controller
tp_cnt RO uint32
port_id RO uint64 Controller port identifier
protocol RO string SCSI transport protocol
binary/
ascii
string
port_name RO Controller port name (WWN)
Name of the interface driver of
the controller
driver_name RO string
Revision of the interface driver
managing the controller
driver_rev RO string
Firmware revision of the con-
troller
firmware_rev RO string
Current configured link speedcur_speed RO string
max_speed RO string Maximum link speed
Capabilities of Controller. The
controller can have no capabilities
("none") or a combination of the
following capabilities:
boot: able to be used for boot.
dump: able to be used for dump.
Note: Utilizing the capabilities of
the controller depends upon the
support from the SCSI devices
connected to the controller.
capability RO string
To enable/disable auto scan of
devices at HBA scope. This value
overrides the value set at global
scope. Values: false (0) or true
(1).
auto_scan_enable RW boolean
Maximum number of internally
generated high priority I/Os per
controller. This value overrides
the value set at global scope.
max_internal_hipri RW uint32
20 Hewlett-Packard Company − 20 − HP-UX 11i Version 3: September 2010