scsimgr.1m (2010 09)

s
scsimgr(1M) scsimgr(1M)
Object Attribute Name RO/RW Type Description
State of the LUN (only valid for
disk LUNs)
LUN state RO string
dev_type RO string Type of the device
device_file RO string Default DSF
class RO string Class of the LUN
instance RO uint LUN instance number
hw_path RO string Hardware path of the LUN
binary
ascii
string
LUN WorldWide Identifier
(WWID)
wwid RO
binary
string
HP-UX specific LUN unique
identifier. It corresponds to the
WWID displayed in binary string
format, for non parallel SCSI dev-
ices, and a combination of WWID,
serial number, vendor identifier
and product identifier for parallel
SCSI devices. It allows to
uniquely identify devices in the
presence of old parallel SCSI dev-
ices with non unique WWID.
uniq_name RO
serial_number RO string Serial Number of device
vid RO string Vendor identifier
pid RO string Product identifier
firmware_rev RO string Firmware revision of device
protocol_rev RO string SPC protocol revision
total_path_cnt RO uint32 Total number of LUN paths
Alias that can be assigned to the
LUN.
Note: By default, no value is
pre-assigned (empty string).
Range: ASCII string < 1024 chars.
alias RW string
Seconds to wait after a LUN has
gone OFFLINE before failing
I/Os.
Range: 0 - 0xFFFFFFFE
transient_secs RW uint32
Enable (true) or disable (false)
multi-pathing on legacy DSF of
this LUN.
Values: false (0) or true (1).
leg_mpath_enable RW boolean
Maximum queue depth.
Range: 1 - 0xFFFFFFFE
max_q_depth RW uint32
User provided lunpath to lock
down for the LUN. Hardware
path, or class and instance
number of the lunpath should be
provided as the identifier. All
I/Os are issued on this lunpath
only (for tape, changer, and pass-
thru LUNs only). If the provided
lunpath is deleted or not present
on the next reboot, no other lun-
path is used for issuing I/Os. User
has to set this attribute to another
lunpath in this case.
lpt_to_lockdown RW string
16 Hewlett-Packard Company − 16 − HP-UX 11i Version 3: September 2010