ram_monitor.1m (2010 09)

r
ram_monitor(1M) ram_monitor(1M)
No.of Filters Configured:2
=================================================================
FilterName ASNO RP ASP DIR ACTION
=================================================================
filter1 100 3333::2222 12,3,4 OUT DENY
filter1 100 3333::2222 12,3,4 OUT DENY
bgp> show eventlog
BGP PEER EVENT LOG INFORMATION
BGP neighbor is 4222::1112, remote AS 700, internal link
BGP peer state = Established, up for 51 seconds
No.of FSM Transitions = 1
FSM Transition History = idle,connect,connect,opensent,active,
opensent,openconfirm,established
BGP PEER EVENT LOG INFORMATION
BGP neighbor is 6222::1111, remote AS 800, external link
BGP peer state = Idle
No.of FSM Transitions = 0
FSM Transition History =
bgp> show error
BGP PEER ERROR INFORMATION
BGP neighbor is 4222::1112, remote AS 700, internal link
Last Error Received NONE
Last Error Subcode Received NONE
Last Error Sent NONE
Last Error Subcode Sent NONE
BGP PEER ERROR INFORMATION
BGP neighbor is 6222::1111, remote AS 800, external link
Last Error Received NONE
Last Error Subcode Received NONE
Last Error Sent NONE
Last Error Subcode Sent NONE
bgp> show log
BGP PEER LOG INFORMATION
BGP neighbor is 4222::1112, remote AS 700, internal link
Received 20 messages, 14 Updates
Sent 14 messages, 8 Updates
BGP PEER LOG INFORMATION
BGP neighbor is 6222::1111, remote AS 800, external link
Received 0 messages, 0 Updates
Sent 0 messages, 0 Updates
IS-IS Example
To invoke
ram_monitor and connect to isisd, type the following at the HP-UX command prompt:
/usr/bin/ram_monitor isis 15000
Following is sample output of the ram_monitor commands:
isis> show adj
IS-IS Adjacency Table:
Sysid Ckt Stte Nbr Usg Hold Pri SNPA IPAddr
00000000000101 2 UP l2 l2 12336 32 112233445566 ::
HP-UX 11i Version 3: September 2010 − 5 − Hewlett-Packard Company 5