ram_monitor.1m (2010 09)

r
ram_monitor(1M) ram_monitor(1M)
Garbage Collection Timer Interval (in sec) : 120
Profile id - 1
Horizon (2 - split/ 3 - poison reverse) : 3
Route Age (in sec) : 180
Periodic Update Timer Interval (in sec) : 50
Triggered Update Timer Interval (in sec) : 5
Garbage Collection Timer Interval (in sec) : 120
ripng> show log
If : lan0
In Messages : 2
Out Messages : 6
Discarded Messages : 2
RIPng In Requests : 0
RIPng In Responses : 2
RIPng Out Requests : 0
RIPng Out Responses : 6
Unknown Commands : 0
Invalid Version : 0
Total Trig Upd sent : 4
ripng> show error
If : lan0
Discarded Messages : 10
Unknown Commands : 0
Invalid Version : 0
Martian Discards : 0
Ripin Discards : 0
Ripout Discards : 0
Route Filter Discards : 0
Trusted Gateway Discards : 0
Import Discards : 0
BGP Examples
To invoke
ram_monitor and connect to bgpd, type the following at the HP-UX command prompt:
/usr/bin/ram_monitor bgp 15000
Following is sample output of the ram_monitor commands:
bgp> show
Command making ambiguity
Available commands :
[Syntax] : show peers
[Syntax] : show eventlog
[Syntax] : show filter
[Syntax] : show route
[Syntax] : show log
[Syntax] : show error
bgp> show peers
No.of peers configured:2
=====================================
BGP neighbor is 4222::1112, remote AS 700, internal link
BGP version 4, remote router ID 10.4.7.192
BGP state = Established, up for 51 seconds
Rcvd update before 51 secs, hold time is 120 secs,
keepalive interval is 40 secs
HP-UX 11i Version 3: September 2010 − 3 − Hewlett-Packard Company 3