ram_monitor.1m (2010 09)

ManualsBrandsHP ManualsSoftwareHP-UX Manpages

ram_monitor(1M) ram_monitor(1M)

NAME

ram_monitor - the Route Administration Manager (RAM) monitor

SYNOPSIS

/usr/bin/ram_monitor

(ripng | bgp |

isis)[IP_address ] CLI_Port_Number

DESCRIPTION

ram_monitor is an interactive command line utility used to query routing protocol daemons

ripngd(1M), bgpd(1M), and isisd (1M). ram_monitor

can be used to view detailed information on the

IO statistics, the error logs, the routing table, the conﬁgured protocol interfaces, and the conﬁgured ﬁlter

policies.

ram_monitor establishes a TCP connection to the routing daemon through the IP address speciﬁed at

startup. If an IP address is not speciﬁed,

ram_monitor connects to the routing protocol daemon run-

ning on the local machine.

Commands

In the interactive mode,

ram_monitor displays one of the following prompt:

daemon> When connected to the local machine.

daemon# When connected to the IP address speciﬁed. The daemon can be ripng,

bgp,orisis.

Any of the

ram_monitor interactive commands can be run at this prompt. The interactive

commands can be interrupted at any time via a keyboard interrupt.

General Commands

? Displays all local commands and their functions.

help [command] Displays the list of commands available in the current mode, if command is not

speciﬁed. If the command name is speciﬁed, the help topic corresponding to the

speciﬁed command is displayed.

history Displays the history of commands executed in the interactive session.

!! Executes the previous command.

! command_num Executes the command speciﬁed by command number, command_num, in the his-

tory of commands.

redirect filename Redirects the command output to the speciﬁed ﬁle.

exit Exits ram_monitor.

RIPng-Speciﬁc Commands

The following are valid RIPng-speciﬁc command:

show filter [gw|route]

Displays the ﬁlters conﬁgured for RIPng.

gw All the gateway ﬁlters are displayed.

route All the route ﬁlters are displayed.

By default, both gateway and route ﬁlters are displayed.

show route Displays the RIPng routing table.

query destination [-t secs ]

Requests the routing table of the gateway using RIPng’s protocol request.

destination speciﬁes the gateway address to which the request has to be sent.

The

-t option speciﬁes the wait time in seconds for the responses. The default

value is 5 seconds if -t is not speciﬁed.

trace (on|off) Toggles the tracing of the protocol daemon.

show log Displays the RIPng protocol statistics.

show error Displays the RIPng Error counters.

show interface Displays the RIPng interface conﬁguration.

HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1

Summary of content (8 pages)

PAGE 1
ram_monitor(1M) ram_monitor(1M) NAME ram_monitor - the Route Administration Manager (RAM) monitor SYNOPSIS /usr/bin/ram_monitor (ripng | bgp | isis) [IP_address ] CLI_Port_Number DESCRIPTION ram_monitor is an interactive command line utility used to query routing protocol daemons ripngd (1M), bgpd(1M), and isisd (1M). ram_monitor can be used to view detailed information on the IO statistics, the error logs, the routing table, the configured protocol interfaces, and the configured filter policies.
PAGE 2
ram_monitor(1M) show profile ram_monitor(1M) Displays configured profiles of RIPng. BGP-Specific Commands The following are valid BGP-specific commands: show filter Displays the list of BGP route filters. show route Displays the BGP routing table. trace (on|off) Toggles the tracing of the protocol daemon. show log Displays the BGP protocol statistics. show error Displays the list of notification sent to peers. show peers Displays the list of BGP peers.
PAGE 3
ram_monitor(1M) ram_monitor(1M) Garbage Collection Timer Interval (in sec) : 120 Profile id - 1 Horizon (2 - split/ 3 - poison reverse) Route Age (in sec) Periodic Update Timer Interval (in sec) Triggered Update Timer Interval (in sec) Garbage Collection Timer Interval (in sec) : : : : : 3 180 50 5 120 ripng> show log If : lan0 In Messages Out Messages Discarded Messages RIPng In Requests RIPng In Responses RIPng Out Requests RIPng Out Responses Unknown Commands Invalid Version Total Trig Upd sent
PAGE 4
ram_monitor(1M) ram_monitor(1M) Received 19 messages, 14 Updates Sent 13 messages, 8 Updates Minimum time between advertisement runs is 15 seconds Peer Preference: 0 Peer Related to NONE Group Peer Capability type MP for IPV6 Peer Connection type: ACTIVE Peer Authentication type: MD5 Local host: 4222::1111, Local port: 179 Foreign host: 4222::1112, Foreign port: 64180 No Peer Gateway BGP neighbor is 6222::1111, remote AS 800, external link BGP version 0, remote router ID 0.0.0.
PAGE 5
ram_monitor(1M) ram_monitor(1M) No.of Filters Configured:2 ================================================================= FilterName ASNO RP ASP DIR ACTION ================================================================= filter1 100 3333::2222 12,3,4 OUT DENY filter1 100 3333::2222 12,3,4 OUT DENY bgp> show eventlog BGP PEER EVENT LOG INFORMATION BGP neighbor is 4222::1112, remote AS 700, internal link BGP peer state = Established, up for 51 seconds No.
PAGE 6
ram_monitor(1M) ram_monitor(1M) IS-IS Adjacency Count Table: Ckt Ckt Idx lan1 2 Adj Count 1 isis> show eventlog EVENTS LOGGED ---------------------------------------------------ISIS_EVT_DIS_CHANGE : EventID:55;CktLvl:2;CktIdx:2;PrevDIS: 0a.0b.01.02.03.04.02;CurrDIS:00.00.00.00.00.01.01 ISIS_EVT_ADJ_CHANGE : EventID:52;Status:0;AdjType:2;AdjIdx: 1;AdjUsage:2;CktIdx:2;MetType:0;Met:10;AdjSysID:00.00.00.00.00.01 ISIS_EVT_IP_IF_ADDR_CHANGE : EventID:42;Status:0;IfIdx:2; IPAddr31.11.00.00.00.00.00.00.00.00.
PAGE 7
ram_monitor(1M) 0a0b01020304.00-01 IS Adjacency : IPv6 IF Address : IPv6 IF Address : IPv6 IF Address : IPv6 Reachability : Authentication Info: 0a0b01020304.02-00 Protocol Supported : Authentication Info: 0a0b01020304.
PAGE 8
ram_monitor(1M) ram_monitor(1M) Interface stats on Ckt No. of adjacencies state changes No. of Init failures in this ckt No. of ISHs sent to peer nodes No. of ISHs recvd to peer nodes No. of Times Adjacency rejected No. of ISIS PDUs sent on this ckt No. of ISIS PDUs recvd on this ckt No. of ctrl PDUs Id len mismatch : : : : : : : : : lan1 [2] 1 0 0 0 0 2 0 0 AUTHOR ram_monitor was developed by Future Software Ltd. SEE ALSO bgpd(1M), isisd(1M), ramd(1M), ripngd(1M), rdc(1M), ramd.conf(4).