pvdisplay.1m (2012 03)

p
pvdisplay(1M) pvdisplay(1M)
yes PV was setup as a bootable physical volume using pvcreate.
no Physical volume is not a bootable physical volume.
unavailable
Physical volume is unavailable.
Relocated Blocks
Display the number of bad blocks that were relocated. Displays unavailable if the PV is una-
vailable.
Compact Listing (-F Option)
The
-F option generates a compact and parsable listing of the command output in colon separated fields
formatted as key=value[,value ...]. The
-F option is designed to be used by scripts. The resulting com-
mand output may be split across multiple lines. The output may include new keys and/or values in the
future. If a key is deprecated, its associated value is set to
NAM (key=NAM). For the current version of
the
pvdisplay command, the lines format is:
LINE 1
The format of Line 1, if -d
is not specified, is as follows:
pv_name=value[,value ...]:vg_name=value:pv_status=value:
allocatable=value:vgda=value:cur_lv=value:pe_size=value:
total_pe=value:free_pe=value:current_pre-allocated_pe=value:
allocated_pe=value:stale_pe=value:io_timeout=value:
autoswitch=value:proactive_polling=value:
mediaerrthrescount=value:mediaerrcurrentcount=value:
mediaerrthrestime=value:mediaerrelapsedtime=value
The format of Line 1, if
-d is specified, is as follows:
pv_name=value[,value ...]:vg_name=value:pv_status=value:
allocatable=value:vgda=value:cur_lv=value:pe_size=value:
total_pe=value:free_pe=value:current_pre-allocated_pe=value:
allocated_pe=value:stale_pe=value:io_timeout=value:
autoswitch=value:data_start=value:data_end=value:
boot_disk=value:relocated_blocks=value:
proactive_polling=value:mediaerrthrescount=value:
mediaerrcurrentcount=value:mediaerrthrestime=value:
mediaerrelapsedtime=value
Note:
1. The key
current_pre-allocated_pe
will be displayed only for volume group version 2.2
and higher.
2. The keys starting with
mediaerr will be displayed only for volume group version 2.0 and
higher.
LINE 2
The format of Line 2 is as follows:
lv_name=value:le_of_lv=value:pe_for_lv=value
... The above line may be repeated with different values.
LINE n
The format of Line n is as follows:
pe=value:pe_status=value:lv=value:le=value
... The above line may be repeated with different values.
Display With -b Option
If
-b is specified, pvdisplay lists additional information for each block specified in BlockList .
--- Block Mapping ---
The use of blocks on pv_path , displayed in column format:
4 Hewlett-Packard Company − 4 − HP-UX 11i Version 3: March 2012