pppoerd.1m (2010 09)

p
pppoerd(1M) pppoerd(1M)
NAME
pppoerd - PPPoE (Point to Point Protocol over Ethernet) relay
SYNOPSIS
pppoerd [-c config-file][
-d debug-level ][-l log-file]
DESCRIPTION
You need the
pppoerd daemon if the PPPoE client and the server are not on the same link.
Options
pppoerd supports the following options:
-c config-file Specify the configuration file with absolute path to be used by
pppoerd. The
default configuration file is
/etc/ppp/pppoerd.conf
.
-d debug-level Specify the debug level at which logging has to be enabled. The three debug lev-
els are:
LOG_ERROR Logs all error messages. To log these messages, type
-d 0 on the
command line.
LOG_WARN Logs all warning messages. To log these messages, type
-d 1 on
the command line.
LOG_DEBUG Logs function level debug messages. To log these messages, type
-d 2 on the command line.
-l log-file Specify the log file with absolute path, to which pppoerd must log all messages.
The default log file is /var/adm/pppoerd.log
.
EXAMPLES
An example usage of
pppoerd is as follows:
/usr/sbin/pppoerd -c tmp/pppoerd.conf -d 0
WARNINGS
Note that, you cannot run the relay without /etc/ppp/pppoerd.conf
file. See pppoerd.conf (4) for
more information.
AUTHOR
pppoerd was developed by Hewlett-Packard.
FILES
pppoesd PPPoE server daemon
pppoec PPPoE client
pppoerd.conf PPPoE relay configuration file
pppd PPP daemon
SEE ALSO
pppd(1), pppoec(1), pppoerd(1M), pppoerd.conf(4).
HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1