parunlock.1m (2010 09)

parunlock(1M) parunlock(1M)

parunlock -d

Unlock the Stable Complex Conﬁguration Data, the Dynamic Complex Conﬁguration Data, the Partition

Conﬁguration Data of all the partitions on the local complex and the cell data of all the cells in the local

complex.

parunlock -A

DEPENDENCIES

This command uses the Web-Based Enterprise Management (WBEM) product and some of its

conﬁguration settings. If you encounter connection errors when using the

-u option, check that the fol-

lowing two conditions are satisﬁed:

• Use the

cimconfig command (see cimconﬁg(1M) in the WBEM product documentation) to verify

(and correct if necessary) the setting of the following two variables:

•

enableRemotePrivilegedUserAccess=true

• enableHttpsConnection=true

• The target partition’s digital certiﬁcate has been appended to the local partition’s Shared Authentica-

tion Store. For the nPartition commands, the Shared Authentication Store is stored in the ﬁle:

/etc/opt/hp/sslshare/known_hosts.pem

. This ﬁle is used by all the clients, which use SSL

based certiﬁcates. If these clients trust a target partition, then the nPartition commands will also

trust the target partition.

Refer to the WBEM documents speciﬁed in the SEE ALSO section below for further information.

AUTHOR

parunlock was developed by the Hewlett-Packard Company.