parstatus2.1 (2011 03)

p
parstatus(1)
For OA Based Partition Management Systems
parstatus(1)
6/2 Empty /Invalid - -
7/1 Empty /Invalid - -
7/2 Empty /Invalid - -
8/1 Empty /Invalid - -
8/2 Empty /Invalid - -
9/1 Empty /Invalid - -
9/2 Empty /Invalid - -
10/1 Empty /Invalid - -
10/2 Empty /Invalid - -
11/1 Empty /Invalid - -
11/2 Empty /Invalid - -
12/1 Empty /Invalid - -
12/2 Empty /Invalid - -
* D-Deconfigured I-Indicted
[Partition]
Par State/ Status* # of # of ILM/ Partition Name
Num RunState Blades IOBays SLM (first 15
(GB)** characters)
=== ============.. ======= ====== ====== ============= ===============
4 Inactive /OK OK 1 1 4.0/12.0 vpmh0-4
* D-Degraded
** Actual allocated for Active and User requested for Inactive
partitions
ERRORS
OA
syslog contains additional description of errors encountered during partition operations. Users can
view the OA syslog from the OA using the SHOW SYSLOG OA command.
Error: System unable to accept partition commands
The above error message is printed out under the following circumstances:
• Attempting to run command from an OA other than the active OA in enclosure 1.
• System has been shut down (e.g. with POWEROFF XFABRIC, or ambient overtemp).
• The OA has not finished initializing.
In the above scenarios, please ensure the system and OA are completely up and you are running the com-
mand from the active OA in enclosure 1.
AUTHOR
parstatus was developed by the Hewlett-Packard Company.
SEE ALSO
On OA:
"help parcreate", "help pardefault", "help parmodify", "help parperm", "help parremove", "help parspec",
"help resourcepath".
On HP-UX:
parcreate(1M), pardefault(1M), parmodify(1M), parperm(1M), parremove(1M), parspec(5), resour-
cepath(5).
HP-UX 11i Version 3: March 2011 − 7 − Hewlett-Packard Company 7