parstatus2.1 (2011 03)

ManualsBrandsHP ManualsSoftwareHP-UX Manpages

parstatus(1)

For OA Based Partition Management Systems

parstatus(1)

When the -V option is speciﬁed, the command shows the contents of all parspecs,

both current and alternate. Note that when a current parspec is shown, the infor-

mation provided will be what is stored in the parspec. It should not be expected to

be identical to information gathered from the associated nPartition.

When the

-P option is speciﬁed, the command shows current parspec names of all

nPartitions. When the

-p option is speciﬁed, it displays the current parspec name

of the speciﬁed nPartition. npart_id can be speciﬁed either as a number or name.

-A Only displays the available resources in the complex.

-C Shows information for all blades in the complex.

-E Shows information for all enclosures in the complex.

-I Shows information for all I/O bays in the complex.

-M Produces a machine readable/parseable output. The machine readable output will

have the columns separated by a single colon character (

:) and will not have a

column header.

Note: The

-M and -V options are mutually exclusive.

-P Shows information for all nPartitions in the complex.

-T Displays the Hyper-Threading information.

-V Verbose mode. Increases the amount of information displayed. Additional informa-

tion displayed with the -V option includes:

For Blade:

• Details of each CPU on the blade

• Details of each I/O on the blade

• Details of memory on the blade

• Memory interleaving / local memory settings

For Enclosure:

• Usage status of each blade in the enclosure

• Health status of each blade in the enclosure

For I/O bay:

• Details of each I/O in the I/O bay

For nPartition:

• Partition number and name

• Current and next boot partition speciﬁcation names

• State and RunState

• Current and next boot operation system types

• Current and next boot Hyper threading settings

• iLO

• Firmware revision

• Total good memory size (the amount of memory that is expected to be made

available to the nPartition when it is booted)

• Total available memory size (the sum total of all the memory DIMMs discovered,

including size of any deconﬁgured memory DIMMs)

• Memory interleaving / local memory settings

• Current and next boot modes

• Current and next boot VGA modes

• Blades summary info

• I/O bays summary info

Note: The

-V and -M options are mutually exclusive.

-X Displays attributes of the complex.

-Z parspec_name Shows contents of the speciﬁed partition speciﬁcation. Note that when a current

parspec is examined with the -Z option, the information provided will be what is

stored in the parspec. It should not be expected to be identical to information gath-

ered from the associated nPartition.

4 Hewlett-Packard Company − 4 − HP-UX 11i Version 3: March 2011