parstatus.1 (2010 09)

p
parstatus(1) parstatus(1)
options.
-B Show information for all cabinets in the complex.
-b cabinet Show information about the specified cabinet.
-C Show information for all cells in the complex.
-c cell Show information about the specified cell. The cell id can be specified either in the
local (cabinet# /slot#) or global (cell_ID ) format. For example, the cell located in
cabinet 0, slot 1 is locally identified as 0/1 or globally as 1.
-g Allows access to the complex specified by the
-h option. The accessed complex is then
considered the target complex. Access is through the service processor’s LAN port.
The
-h option is required if this option is used.
If this option is specified, the command prompts for the password.
If an error is reported when you attempt to connect using this option, check to see that
IPMI LAN access has not been disabled on the remote service processor. Access to the
complex through IPMI over LAN can be enabled or disabled by logging on to the ser-
vice processor and using the
SA command from the Command Menu.
The
-u and -g options are mutually exclusive.
-h IPaddress|hostname
This option should only be used in combination with either the -u or -g
option.
IPaddress|hostname specifies the IP address or hostname of the target partition (
-u)
or complex (
-g).
-I Show information for all I/O chassis in the complex.
-i I/Ochassis Show information about the specified I/Ochassis . The I/Ochassis id can be specified
in the form of cabinet# /enclosure# /chassis# . For example, the I/O chassis located in
cabinet 0, enclosure 1 and I/O chassis slot 3 is identified as 0/1/3.
-M Produce a machine readable/parseable output, or restrict the output of the
-w option
to a partition number. The machine readable output will have the columns separated
by a single colon character (
:) and will not have a column header.
-P Show information for all partitions in the complex.
-p PartitionNumber
Show information about the specified partition. PartitionNumber is the unique parti-
tion number (integer) which was assigned to the partition when it was created.
-S Display the cell online activation (OLA) and deactivation (OLD) operation status
information of all cells in a partition.
-s Indicates if the command is being executed on a hardware partitionable platform.
When this option is specified, the command will either succeed or fail (see RETURN
VALUE below) and nothing will be displayed on stdout or stderr.
-T Only display the Hyper-Threading information for supported systems. If the -T
option is used with other options, an error occurs except when the -T option is used
with its related options. If the -T option is used on a non-supported system, an error
occurs.
-u username[:] Specifies the required authorization to access a partition other than the local partition
(but can also be used as a loopback access to the local partition). If complex attributes
are displayed, the complex is the one in which this target partition resides.
The
-h option is required if this option is used.
If this option is specified, the command prompts for the password.
username specifies a configured user name on the target partition.
Note: This command is a Web-Based Enterprise Management (WBEM) Client Appli-
cation. The
-u option accesses the target partition using a Secure Sockets Layer
(SSL) connection. If errors are reported, check that the conditions described in the
DEPENDENCIES section are satisfied.
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2010