parspec.5 (2010 09)

p
parspec(5)
For OA Based Partition Management Systems
parspec(5)
parcreate -Z Alt_Config
Switch to an alternate configuration. Note that the current configuration maintained in a
parspec is
not removed when the nPartition is removed. The first command will display the name of the current
parspec for nPartition 1.
parstatus -p 1 -z
poweroff partition 1
parremove -p 1
parcreate -Z Alt_Config
ERRORS
OA syslog contains additional description of errors encountered during partition operations. Users can
view the OA syslog from the OA using "SHOW SYSLOG OA" command.
"Error: System unable to accept partition commands"
The above error message is printed out under the following circumstances:
• Attempting to run command from an OA other than the active OA in enclosure 1
• System has been shut down (e.g. with POWEROFF XFABRIC, or ambient overtemp)
• The OA has not finished initializing.
In the above scenarios, please ensure the system and OA are completely up and you are running the com-
mand from the active OA in enclosure 1.
AUTHOR
parspec was developed by the Hewlett-Packard Company.
SEE ALSO
On OA:
"help parcreate", "help pardefault", "help parmodify", "help parperm", "help parremove", "help parstatus",
"help resourcepath".
On HP-UX:
parcreate(1M), pardefault(1M), parmodify(1M), parperm(1M), parremove(1M), parstatus(1M), resour-
cepath(5).
HP-UX 11i Version 3: September 2010 − 3 − Hewlett-Packard Company 3