parremove2.1m (2011 03)

p
parremove(1M)
For OA Based Partition Management Systems
parremove(1M)
Remove current partition specification of the inactive nPartition 2:
parremove -p 2 -Z
Remove an alternate partition specification myParspec:
parremove -Z myParspec
ERRORS
OA syslog contains additional description of errors encountered during partition operations. Users can
view the OA syslog from the OA using the
SHOW SYSLOG OA command.
Error: System unable to accept partition commands
The above error message is printed out under the following circumstances:
• Attempting to run command from an OA other than the active OA in enclosure 1.
• System has been shut down (e.g. with POWEROFF XFABRIC, or ambient overtemp).
• The OA has not finished initializing.
In the above scenarios, please ensure the system and OA are completely up and you are running the com-
mand from the active OA in enclosure 1.
AUTHOR
parremove was developed by the Hewlett-Packard Company.
SEE ALSO
On OA:
"help parcreate", "help parmodify", "help parperm", "help parstatus".
On HP-UX:
parcreate(1M), parmodify(1M), parperm(1M), parstatus(1M).
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: March 2011