parmodify.1m (2010 09)

p
parmodify(1M) parmodify(1M)
0 Successful completion.
1 Error condition occurred.
EXAMPLES
Add a new cell in cabinet 0 slot 5 to the existing Partition 2.
parmodify -p 2 -a 0/5:base:y:ri:50% -B
Activate the added cell online.
parolrad -a 0/5
Delete a cell in cabinet 0 slot 5 from the existing Partition 2.
parmodify -p 2 -d 5
WARNINGS
On a partition whose hardware resources are managed under an Instant Capacity (iCAP) license, the
parmodify command fails if a configuration change would take the partition out of compliance.
Examples of such actions include:
• Assigning an iCAP cell to a partition, specifying "y" for the cell’s use_on_next_boot field.
• Changing an iCAP cell’s use_on_next_boot field to "y" after assigning it to a partition.
• Assigning a cell containing iCAP-licensed CPUs to a partition that is not running, or that does not
have the iCAP software installed.
For more information about actions that are restricted on iCAP partitions, refer to the HP Instant Capa-
city User’s Guide located at
http://www.hp.com/go/hpux-core-docs
.
DEPENDENCIES
This command uses the Web-Based Enterprise Management (WBEM) product and some of its
configuration settings. If you encounter connection errors when using the
-u option, check that the fol-
lowing two conditions are satisfied:
• Use the
cimconfig command (see cimconfig(1M) in the WBEM product documentation) to verify
(and correct if necessary) the setting of the following two variables:
•
enableRemotePrivilegedUserAccess=true
• enableHttpsConnection=true
• The target partition’s digital certificate has been appended to the local partition’s Shared Authentica-
tion Store. For the nPartition commands, the Shared Authentication Store is stored in the file:
/etc/opt/hp/sslshare/known_hosts.pem
. This file is used by all the clients, which use SSL
based certificates. If these clients trust a target partition, then the nPartition commands will also
trust the target partition.
Refer to the WBEM documents specified in the SEE ALSO section below for further information.
AUTHOR
parmodify was developed by the Hewlett-Packard Company.
SEE ALSO
fruled(1), parstatus(1), cplxmodify(1M), frupower(1M), parconfig(1M), parcreate(1M), parmgr(1M),
parolrad(1M), parremove(1M), parunlock(1M), partition(5).
nPartition Administrator’s Guide on http://www.hp.com/go/hpux-core-docs
.
HP WBEM Services for HP-UX System Administrator’s Guide on
http://www.hp.com/go/hpux-
core-docs,
HP WBEM Services for HP-UX 11i v2.0 on Integrity Servers Version A.01.05 Release Notes on
http://www.hp.com/go/hpux-core-docs.
HP-UX 11i Version 3: September 2010 − 5 − Hewlett-Packard Company 5