olrad.1m (2010 09)

olrad(1M) olrad(1M)

WARNINGS

Any changes to an I/O chassis conﬁguration done by adding or removing I/O cards while the I/O chassis is

in inactive state will not be effective by default. I/O Chassis can be in inactive state either because it is

connected to an inactive cell or it has been deconﬁgured using the

olrad chassis delete operation. The

supported procedure for inserting or removing PCI I/O cards in such an inactive I/O chassis is as follows:

1. Power down the cell attached to the I/O chassis using

frupower -f -c cell or the MP.

2. Add or remove I/O cards to I/O chassis, using latches to disable slot power if necessary.

3. Power up the attached cell using

frupower -o -c cell or the MP.

FILES

NetTL log ﬁle containing olrad audit trail and errors.