nwmgr_ixgbe.1m (2010 09)

n
nwmgr_ixgbe(1M) nwmgr_ixgbe(1M)
-s | --set Set the attributes of the interface.
Options
Beside operations, these options are valid for the
ixgbe interface:
-A | --attribute Specifies attributes for an operation. For
ixgbe, this can be used with
the
add, set, get, and
diagnose operations.
See Attributes section below for valid attributes of
ixgbe interfaces.
-c | --class_instance
Specifies the target interface on which the operation is to be performed.
For
ixgbe, the target interface is of the form:
lanPPA
where PPA is the physical point of attachment.
-S | --subsystem Specifies the target subsystem for the operation. For the
ixgbe subsys-
tem, the option argument is always
ixgbe
.
--fr | --from Specifies the configuration from which the operation will copy data. For
the
ixgbe subsystem, current and default are the only allowed
arguments for this option.
--it | --iteration Specifies the number of frames to be sent for diagnostics, used with the
diagnose operation.
-q | --subsystem_qualifier
Specifies an ixgbe specific target qualifier. The arguments supported
for ixgbe are: info, vpd, dps_map, and drv_coal.
info Provides more information on the instance of the
ixgbe
subsystem; such as, the hardware path, feature capabilities,
current feature settings, the assigned NMID, speed, and
MTU of the card.
vpd Provides vital product data (VPD) which is a standardized
set of read-only properties for an interface, including
Manufacturing Data for the NIC and the firmware versions.
dps_map Provides destination port based steering settings informa-
tion.
drv_coal Provides interrupt coalescing settings information.
--sa | --saved Specifies that the operation must be performed on the saved
configuration (persistent store).
--cu | --current Specifies that the operation must be performed on the current values of
the attributes of the interface. See Attributes section below for valid
attributes of ixgbe interfaces.
--sc | --script Displays the output in script parseable format.
--st | --stats Specifies that the operation applies to the statistics of the target.
-v | --verbose Specifies verbose output to display more detail.
Attributes
The valid attributes for
ixgbe interface are:
dest=mac_addr Ethernet MAC address of the remote interface. Used with the diagnose opera-
tion.
dps_rr DPS PQM Round Robin. Enable/Disable round robin mode of queue assignment for
destination port based steering.
Values:Off,On
Default: Off
dps_ttm DPS PQM Periodic Invalidation. Enable/Disable periodic invalidation of Port-to-
queue mapping table entries for Destination Port based steering.
Values:Off,On
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2010