nwmgr_iqxgbe.1m (2011 09)

nwmgr_iqxgbe(1M) nwmgr_iqxgbe(1M)

Command to Reset Statistics of a NIC

lanadmin nwmgr

lanadmin -c PPA nwmgr -r -st -c lanPPA

Command to Reset MTU to the Default Value

lanadmin nwmgr

lanadmin -R PPA nwmgr -s -A mtu

-from default -c lanPPA

Command to Set to Default Conﬁgurations

lanadmin nwmgr

lanadmin -A DEFAULT nwmgr -s -A mac -from default

PPA -c lanPPA

NOTE: Similarly default configuration

can be set for the other attributes

like mtu, mac etc.

Note: The nwmgr equivalent for displaying the usage information is not available.

Note: The lanadmin options that support apa and vlan are covered in the nwmgr_apa(1M) and

nwmgr_vlan(1M) manpages.

LINKLOOP COMMAND

Command to Test the Link Level Connectivity

linkloop nwmgr

linkloop -i PPA nwmgr --diag -A dest=MAC_Address

MAC_Address -c lanPPA

linkloop -i PPA nwmgr --diag -A dest=MAC_Address,

-n count -s size pktsize=size, timeout=timeout

-t timeout MAC_Address --it count -c lanPPA

linkloop -r rif N/A

Note: nwmgr does not allow multiple station addresses to be speciﬁed in the same command line.

LANSCAN COMMAND

Command To List Interfaces and Their Attributes

lanscan nwmgr

lanscan nwmgr -g -v -c lanPPA

nwmgr -C lan

nwmgr -S gelan

Command To Display Interface Names Only

lanscan nwmgr

lanscan -i nwmgr -g -v -c lanPPA

nwmgr -C lan -sc | awk -F# ’/if_state/ {print $1}’

8 Hewlett-Packard Company − 8 − HP-UX 11i Version 3: September 2011