nwmgr_iqxgbe.1m (2011 09)

n
nwmgr_iqxgbe(1M) nwmgr_iqxgbe(1M)
Operations
The nwmgr command provides the following operations for the iqxgbe interface.
--cra Operation to perform Critical Resource Analysis on the interface.
--diag | --diagnose Operation to diagnose/test link connectivity.
-g | --get Operation to get/display interface settings.
-h | --help Operation to display help information.
-r | --reset Operation to reset interface or statistics.
-s | --set Operation to set the attributes of the interface.
Options
The
nwmgr command provides the following options for the
iqxgbe interface. For more information
about these options, refer to nwmgr(1M).
-A | --attribute Operation to assign attributes for the operation.
Attributes that can be used for
iqxgbe interfaces are described in the Attri-
butes section below.
-c | --class_instance
Specifies the target interface on which the operation is to be performed.
For
iqxgbe, the target interface is of the form: lanPPA
where PPA is the physical point of attachment.
--fr | --from Specifies the configuration from which the operation will copy data. The
from
option takes current or saved as argument.
-it | --iteration Specifies how many test frame to send during a diagnose operation. The
default is 1.
-q | --subsystem_qualifier
Specifies a generic target qualifier was used to specify a subsystem specific tar-
get qualifier.
The arguments supported for
iqxgbe are info and vpd.
info Provides more information on the instance of the
iqxgbe subsystem;
such as, the hardware path, feature capabilities, current feature set-
tings, the assigned NMID, speed, and MTU of the card.
vpd Provides vital product data (VPD) which is a standardize set of read-
only properties for an interface, including Manufactured Data for the
NIC and the firmware versions.
-S | --subsystem Specifies the target subsystem for the operation. For iqxgbe subsystem, the
option argument will always be iqxgbe.
--sa | --saved Specifies that the operation has to be performed on the saved configuration
(per sistent store).
-sc | --script Display the output in script parseable format.
--st | --stats Specifies that the operation applies to the statistics of the target.
-v | --verbose Option to display more details in the output.
Attributes
The valid attributes for the
iqxgbe interface are:
dest=mac_addr Ethernet MAC address of the remote interface. Used with the diagnose
operation.
mac Ethernet MAC Address. The default value is the factory MAC address.
mtu Maximum Ethernet payload size, in bytes.
Minimum: 257
Maximum: 9000
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2011