nwmgr_iocxgbe.1m (2011 09)

n
nwmgr_iocxgbe(1M) nwmgr_iocxgbe(1M)
extmib The extended MIB statistics are displayed. This overrides the
mib argument, if present.
subsys Displays the subsystem-specific statistics, which can vary from one driver to another.
all Displays both extended MIB statistics and subsystem-specific statistics, in other words, it
is equivalent to extmib,subsys
. It overrides any other arguments that may be
present.
It is possible to give more than one argument to the
--stats option, as a comma-separated list.
For example,
--stats mib,subsys displays both the specified sets of statistics.
View Driver Statistics
nwmgr [-g] -q drv_stats -c lan
PPA
nwmgr [--get] --subsystem_qualifier drv_stats --class_instance lan
PPA
This command prints all the hardware statistics for the NIC.
View Interface Attributes (Non-internal)
nwmgr [-g] -A {all
| attr1, attr2, ...} -c lanPPA
nwmgr [--get] --attribute {all | attr1
, attr2, ...} --class_instance lan
PPA
These commands display the current value of either all the attributes of the interface (when the
all keyword is specified) or the specified attributes (when they are listed by name). Each attribute
is listed on a separate line as a name-value pair.
View Interface Attributes
nwmgr [-g] --hp -A {all | attr1, attr2, ...} -c lanPPA
nwmgr [--get] --hp --attribute {all | attr1, attr2, ...} --class_instance lan
PPA
These commands display the current value of either all the attributes of the interface (when the
all keyword is specified) or the specified attributes (when they are listed by name). Each attribute
is listed on a separate line as a name-value pair.
View Interface Details
nwmgr [-g] -q info -c lanPPA
nwmgr [--get] --subsystem_qualifier info --class_instance lan
PPA
This form displays interface-specific properties that are informational, often not configurable and
subject to variation across drivers. It first displays the verbose listing for the interface (same as
what is shown by
nwmgr -g -v -c lanPPA). It then displays PCI-related properties such as
the PCI Device ID. It also displays the current driver state for the specified interface.
View Interface’s Vital Product Data
These commands display the interface’s vital product data.
nwmgr [-g] -q vpd -c lanPPA
nwmgr [--get] --subsystem_qualifier vpd --class_instance lan
PPA
The Vital Product Data is a standardized set of read-only properties for an interface, including
Manufacturing Data for the NIC, and the firmware versions.
View Interrupt Coalescing Settings
nwmgr [-g] -q drv_coal -c lanPPA
nwmgr [--get] --subsystem_qualifier drv_coal --class_instance lan
PPA
Set Current Values of Specified Attributes to Their Stated Values
nwmgr -s [ --hp ] -A attr1=value1, attr2=value2,... -c lanPPA
nwmgr --set [ --hp ] --attribute attr1=value1, attr2=value2,... --class_instance
lanPPA
Save Attributes Values as Default Values for An Interface
nwmgr -s [ --hp ] -A --sa --fr cu[rrent] -c lanPPA
HP-UX 11i Version 3: September 2011 − 5 − Hewlett-Packard Company 5