nwmgr_intl100.1m (2010 09)

n
nwmgr_intl100(1M) nwmgr_intl100(1M)
Display all attributes of the intl100 interface
lan1.
nwmgr -A all -c lan1
Set MTU to 1400 and speed to auto-negotiation
on
lan1.
nwmgr -s -A mtu=1400,speed=auto_on -c lan1
Restore MTU and the MAC address to their defaults on
lan1.
nwmgr --set -A mtu,mac --from de -c lan1
COMPARISON WITH LANADMIN
Commands To Display Generic NIC Attributes
lanadmin nwmgr
lanadmin -m PPA nwmgr [-g] -A mtu -c lanPPA
lanadmin -a PPA nwmgr [-g] -A mac -c lanPPA
landamin -s PPA nwmgr [-g] -A speed -c lanPPA
lanadmin -m -a -s PPA nwmgr [-g] -A mtu,mac,speed -c lanPPA
nwmgr [-g] -A all -c lanPPA
Commands To Get NIC Statistics
lanadmin nwmgr
lanadmin -g PPA nwmgr -g --st mib -c lanPPA
lanadmin -x stats drv PPA nwmgr -g --st subsys -c lanPPA
nwmgr -g -st mib,subsys -c lanPPA
lanadmin -g mibstats_ext PPA nwmgr -g --st extmib -c lanPPA
Commands To Set Generic NIC Attributes
lanadmin nwmgr
lanadmin -M mtu_size PPA nwmgr -s -A mtu=mtu_size
-c lanPPA
lanadmin -A MAC_Add PPA nwmgr -s -A mac=MAC_Address
-c lanPPA
lanadmin -S speed PPA N/A. NOTE: Speed can be specified
as a combination of speed and
duplixity only. For example:
000FD, 100HD etc.
landmin -X speed_value PPA nwmgr -s -A speed=speed_value
-c lanPPA
Command To Reset Statistics of a NIC
lanadmin nwmgr
lanadmin -c PPA nwmgr -r -st -c lanPPA
6 Hewlett-Packard Company − 6 − HP-UX 11i Version 3: September 2010