netmgr_igelan.1m (2010 09)

nwmgr_igelan(1M) nwmgr_igelan(1M)

Command to Set NIC Speciﬁc Attributes

lanadmin nwmgr

lanadmin -X fctrl on PPA nwmgr -s -A rx_fctrl={on|off}

-c lanPPA

lanadmin -X send_cko_off PPA nwmgr -s -A tx_cko={on|off}

-c lanPPA

lanadmin -X recv_cko_on PPA nwmgr -s -A rx_cko={on|off}

-c lanPPA

Command to Reset a NIC

lanadmin nwmgr

lanadmin -r PPA nwmgr -r -c lanPPA

Command to Reset Statistics of a NIC

lanadmin nwmgr

lanadmin -c PPA nwmgr -r -st -c lanPPA

Command to Reset MTU to the Default Value

lanadmin nwmgr

lanadmin -R PPA nwmgr -s -A mtu

-from default -c lanPPA

Command to Set to Default Conﬁgurations

lanadmin nwmgr

lanadmin -A DEFAULT nwmgr -s -A mac -from default

PPA -c lanPPA

NOTE: Similarly default configuration

can be set for the other attributes

like speed,mtu, mac etc.

Note: The nwmgr equivalent for displaying the usage information is not available.

Note: The lanadmin options that support apa and vlan are covered in the nwmgr_apa(1M) and

nwmgr_vlan(1M) manpages.

LINKLOOP COMMAND

Command to Test the Link Level Connectivity

linkloop nwmgr

linkloop -i PPA nwmgr --diag -A dest=MAC_Address

MAC_Address -c lanPPA

linkloop -i PPA nwmgr --diag -A dest=linkaddr,

-n count -s size pktsize=size, timeout= timeout

-t timeout MAC_Address --it count -c lanPPA

linkloop -r rif N/A

Note: nwmgr does not allow multiple station addresses to be speciﬁed in the same command line.

HP-UX 11i Version 3: September 2010 − 9 − Hewlett-Packard Company 9