netmgr_apa.1m (2010 09)

n
nwmgr_apa(1M) nwmgr_apa(1M)
Group Capability. A value used for aggregating ports using
FEC_AUTO mode
Min: 0, Max: 65535 Default: none.
gc -g -s
Key value used for aggregating ports with LACP_AUTO
mode
Min: 0, Max: 65535 Default: 0
key -g -s
(Global) LACP SYSID Mode. How APA selects the LACP
System ID when LACP is started. This attribute is
equivalent to the HP_APA_LACP_SYSTEM_ID_MODE
parameter found in the
/etc/rc.config.d/hp_apaconf
configuration file.
When the value is FIRST_APA_PORT, the LACP System ID
is the MAC address of the first APA supported port.
When the value is FIRST_LACP_PORT, the LACP System
ID is the MAC address of the first up port that starts LACP.
Values: FIRST_APA_PORT, FIRST_LACP_PORT.Default:
FIRST_APA_PORT.
lacp_sysid -g -s
(Global) LACP Timeout. The bit value of the LACP
Timeout bit in LACP protocol packet. Refer to IEEE
802.3ad (LACP) standard. This attribute is equivalent to
the HP_APA_LACP_TIMEOUT parameter found in the
/etc/rc.config.d/hp_apaconf
configuration file.
Values: 0 (Slow Timeout), 1 (Fast Timeout). Default: 0.
lacp_timeout -g -s
Load Distribution Algorithm for outbound data transfer.
Values: LB_MAC, LB_IP, LB_HOT_STANDBY, LB_PORT.
Default: LB_MAC
lb -a -g -s
A list of PPAs of physical links or link aggregates
(separated by commas) that are to be added to or deleted
from a link aggregate or failover group. Link aggregate
PPAs are allowed to be in the list only when operating on a
failover group.
links -a -d
MAC Address of an APA interface. The value is expressed
as a 6-byte hexadecimal number.
mac -g -s
(Global). Maximum number of link aggregates that can be
configured. This attribute is equivalent to the
HP_APA_MAX_LINKAGGS parameter in
/etc/rc.config.d/hp_apaconf file.
Min: 5, Max: 50 Default: 50
max_linkaggs -g -s
Configuration mode for port, link aggregate or failover
group. For the -a operation, mode can only be set to either
MANUAL or LAN_MONITOR . For the -s operation, mode
can only be set for physical link but not for link aggregate
or failover group.
Values: LACP_AUTO , FEC_AUTO, MANUAL, LAN_MONITOR .
Default: none.
mode -a -g -s
HP-UX 11i Version 3: September 2010 − 5 − Hewlett-Packard Company 5