netmgr_apa.1m (2010 09)

ManualsBrandsHP ManualsSoftwareHP-UX Manpages

nwmgr_apa(1M) nwmgr_apa(1M)

This command displays all attributes or selected attributes of an APA or physical LAN interface.

Use commas to separate multiple attributes. When you specify

all, all attributes are displayed.

See the Attributes section for a list of valid attributes.

View All or Selected Global APA Attributes

nwmgr [-g]{-q global

| -A attr1,attr2,...} [--cu][--sa] -S apa [--sc]

This command displays all global attributes or selected global attributes. Use commas to separate

multiple attributes. When you specify

-q global

, all APA global attributes are displayed. With

--cu option speciﬁed in command line, current APA global attributes saved in kernel are

displayed.

With the

--sa option speciﬁed in command line, APA global attributes saved in the conﬁguration

ﬁle are displayed. See the Attributes section for a list of valid attributes.

View APA Interface Statistics

nwmgr [-g] --st [mib]

{-c lanaggregate_instance |

-I aggregate_instance}

-S apa [--sc]

This command displays the MIB statistics of a link aggregate. This command is equivalent to the

lanadmin -g command.

View APA Interface Statistics in Monitor Mode

nwmgr -g --st monitor

[-q counter={{o|octet}|{p|packet}|{t

|throughput}} [:{y|phyerrs}]]

[

-q value={{c|current}| {d|delta}| {r

|rebased}}]

[

--wrap|--sc][--interval seconds][--iterations count]

{ -c lanaggregate_instance |

-I aggregate_instance }

-S apa

This command displays the MIB statistics of a linkaggregate in monitor mode. The statistics is in

the units octet (number of 8-bit values), throughput (megabits per second), or packet. The

default statistics type is octet. Only one of these types can be displayed. The physerr

statistics

can also be included by appending it to the counter value (for example,

p:y).

The

value type describes how the quantities are to be displayed. For each statistic displayed,

delta (default) displays the change in value since the previous display. current displays the

change since the last reset of the link aggregate. rebase displays the change since the command

invocation. The time (in seconds) between displays is speciﬁed with the --interval option, and

the number of displays is speciﬁed with the --iterations option.

nwmgr -g --st monitor

[-q counter={p|packet}[:{t|throughput}]]

[-q value={d|delta}]

[--wrap|--sc][--interval seconds][--iterations count]

{ -c lanaggregate_instance | -I aggregate_instance }

-S apa

This command displays the MIB statistics of a link aggregate in its monitor mode; that is, displays

the statistics continuously using default or user speciﬁed interval time period for the number of

iterations speciﬁed. The statistics also includes that of the member ports of the link aggregate. The

default counter option is packet and the default value option is delta. If no interval value is

speciﬁed, the default value is 1 second, and if no iteration value is speciﬁed, the default value is 0,

which means monitor indeﬁnitely.

Reset the MIB Statistics of an APA Interface

nwmgr -r --st {-c lanaggregate_instance | -I aggregate_instance} -S apa

To have the statistics reset on a link aggregate or failover group, do the above command.

This command cannot be used to reset the statistics of a link aggregate inside a failover group. In this

case,

nwmgr returns [EBUSY].

Rebalance the Load Among Member Links in a Link Aggregate

nwmgr -r -q data_flow {-c lanaggregate_instance | -I aggregate_instance } -S apa

10 Hewlett-Packard Company − 10 − HP-UX 11i Version 3: September 2010