maxfiles.5 (2010 09)

m
maxfiles(5) maxfiles(5)
(Tunable Kernel Parameters)
NAME
maxfiles - initial (soft) maximum number of file descriptors per process
VALUES
Failsafe
60
Default
The default value is computed at runtime and depends on the amount of physical memory on the system.
For small memory systems (less than 1GB), the default is 512. For systems with more than 1GB of
memory, the default is 2048, or 2K.
Allowed values
The minimum value is 32. The maximum value is 1048576, or 1M. The value is further constrained in
that it must be equal to or less than the hard limit,
maxfiles_lim.
Specify a positive integer value.
Recommended values
At runtime, a warning will be issued if the tunable is set to a value greater than 409600, or 400K. This is
beyond the tested limit.
At runtime, a warning will be issued if the value is not a multiple of the file descriptor chunk (multiple of
8) size. This is not a serious warning, just an information message for the administrator.
DESCRIPTION
maxfiles specifies the initial default number of file descriptors a process is allowed to have for open
files at any given time. It is possible for a process to increase its soft limit and therefore open more than
maxfiles files.
Nonsuperuser processes can increase their soft limit using
setrlimit() or ulimit() until they reach
the hard limit, maxfiles_lim.
Who Is Expected to Change This Tunable?
This value of this tunable rarely needs to be modified. However, this tunable may need to be modified on
systems that will run applications using large numbers of file descriptors, or on systems where memory
consumption needs to be reduced.
Restrictions on Changing
This tunable is static. To have changes to the value of this tunable take effect, a system reboot is
required.
When Should the Value of This Tunable Be Raised?
This tunable may need to be raised on systems that will run applications using large numbers of file
descriptors if the applications do not already increase their process soft limit, for example using
setrlimit().
What are the Side Effects of Raising the Value?
The initial process memory footprint grows due to a larger per process file table.
When Should the Value of This Tunable Be Lowered?
The value should be lowered to limit the number of initial file descriptors per process on a system to
reduce memory consumption.
What are the Side Effects of Lowering the Value?
The initial process memory footprint shrinks due to a smaller per process file table.
What Other Tunable Values Should Be Changed at the Same Time?
The value assigned to
maxfiles must be less than or equal to the value of maxfiles_lim.Kernel
checks during tunable setting ensure this.
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its
meaning changed in future releases of HP-UX.
HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1