Manualshelf

make_ipf_tape.1m (2012 03)

ManualsBrandsHP ManualsSoftwareHP-UX Manpages
1234
m
make_ipf_tape(1M) make_ipf_tape(1M)
NAME
make_ipf_tape - create an ANSI labeled bootable tape for an Integrity system
SYNOPSIS
/opt/ignite/bin/make_ipf_tape
-f config_file [
-f config_file ...] |
-F config_file [
-F config_file ... -C cfg_clause ...] | -c cfg_clause
[
-C cfg_clause ]
[ -d tape_device_file ]
[ -n vol_name]
[ -l LIF_file]
[ -r release ]
[ -s script_file ...]
[ -V]
[ -w output_file ]
[ -?]
DESCRIPTION
make_ipf_tape
creates an ANSI labeled bootable tape for an Integrity system. This tape contains all
the required boot and install components for the system that the tape is created on. It does not contain
the recovery archive.
Errors are always logged to
standard error.
Options
make_ipf_tape recognizes the following options:
-f config_file Specifies an Ignite-UX config file that will go to the
CONFIG in the LIF volume. If
multiple
-f options are given, the specified files are concatenated into CONFIG in
the order they appear on the command line. (This CONFIG file is referenced in a
cfg clause in an Ignite-UX INDEX file also placed in the LIF volume; this cfg
clause uses a default description string.) Either this option or one of the -F,
and -c options is required.
-F config_file Specifies an Ignite-UX config file similar to -f
, but creates multiple CONFIG1,2,...
LIF files in the LIF volume, each with a corresponding cfg clause in the
INDEX file
whose tag-string is based on
-C options intermixed with -F options. Either this
option or one of the -f, and -c options is required.
-c cfg_clause Specifies an Ignite-UX cfg clause (tag-string) in the
/var/opt/ignite/data/INDEX
file from which to get config file information.
(Enclose
cfg_clause in quotes if it contains whitespace.) All config files listed in
this clause are concatenated together in the order specified in the INDEX file to
form a single config file named CONFIG in the LIF volume. If there is a description
for this cfg clause, it is preserved in the INDEX file in the LIF volume; otherwise
a default is provided. Either this option or one of the -f, and -F options is
required.
-C cfg_clause Specifies the tag-string to use in the INDEX file in the LIF volume for the cfg
clause that references the CONFIG file (or with -F, the next CONFIG1,2,... file).
(Enclose cfg_clause in quotes if it contains whitespace.) With one or more -f
options, the default tag-string is "HP-UX release Default", where release is as
described in the -r option. With the -c option, the default tag-string is the same
as the one specified with -c.
-d tape_device_file
Specifies a tape drive with full path name. By default, the non-rewind device file
/dev/rmt/0mn will be used.
-n volume_name
Specifies the name of tape volume. Normally, this defaults to the first six charac-
ters of "HP" plus month and date the tape created.
-l LIF_file Specifies where the resulting LIF volume (boot image) file is to be written. The
default is /var/tmp/HPUXIUXLIF.
HP-UX 11i Version 3: March 2012 − 1 − Hewlett-Packard Company 1

Summary of content (4 pages)