make_depots.1m (2012 03)

make_depots(1M) make_depots(1M)

Process only Series 700 B.11.23 bundles found on a protected CD and pass along a codeword and

customer_ID for access:

make_depots -r B.11.23 -a 700 -s /dev/dsk/c0t3d0 -o B.11.23 \

-x codeword="jona than alli sonk" -x customer_ID="Mykids Company"

Process only Series 800 ignitable B.11.23 bundles found on a remote depot on client molly under a direc-

tory entitled peaches :

make_depots -r B.11.23 -d peaches -s molly:/var/depot/Source \

-i -o

B.11.23 -a 800

Process Series 700 B.11.23 core media (using the default source

/dev/rmt/0m) with the assumption

that operating system archives will be used:

make_depots -r B.11.23 -a 700 -t core_archive

WARNINGS

Some HP media contains protected software. Without providing a codeword and customer ID to this com-

mand to unlock the protected software on such media (or doing it via an SD command previously), no pro-

tected software will be copied to the destination depot. This command does not provide any information

regarding software not copied. See the EXAMPLES section on how to run

make_depots and provide a

codeword and customer ID on the command line. If there is protected software that did not get copied,

there will be a message in

/var/opt/ignite/logs/make_depots

similar to this:

WARNING: The source "host:<path_to_source_depot>" is a

CD-ROM with part number "". This CD-ROM contains both

protected and unprotected software. No codeword or customer ID

was entered and no valid saved ones were found for this

CD-ROM. A valid codeword is not required to access unprotected

software. To ﬁnd a valid codeword and customer ID, examine

the CD-ROM certiﬁcate which you received from HP for this

CD-ROM. If you need access to software on this CD-ROM which is

currently protected, rerun the command and use the "-x

codeword=CODEWORD" and "-x customer_id=CUSTOMER_ID" options to

enter the correct codeword and customer ID.