lanadmin.1m (2010 09)

l
lanadmin(1M) lanadmin(1M)
(TO BE OBSOLETED)
-M mtu_size Set the new MTU size of the interface corresponding to PPA. The mtu_size value
must be within the link specific range. You must be a privileged user.
-p Display the usage information for the interface corresponding to PPA.Displays
the upper level protocols and applications attached to the interface corresponding
to PPA. If none is attached, it prints nothing.
-r Reset the local LAN interface card corresponding to PPA, causing it to execute its
self-test. Local access to the network is interrupted during execution of reset.
You must be a privileged user.
-R Reset the MTU size of the interface corresponding to PPA to the default for that
link type. You must be a privileged user.
-s Display the current link speed setting of the interface corresponding to PPA.
-S speed Set the new link speed setting of the interface corresponding to PPA. You must
be a privileged user.
-V vlan_options Executes VLAN-specific options; some options require specific parameters
(parms ). See vlan (7) for complete syntax and usage of this option. The sup-
ported vlan_options are:
create Create a VLAN.
modify Modify the properties of a VLAN.
delete Delete a VLAN.
scan Display information about all VLANs on a system.
info Display information about a particular VLAN on a system.
basevppa Display the minimum acceptable virtual PPA (VPPA) value.
-x options Get and display driver specific options of the interface corresponding to PPA.
-X options Set driver specific options of the interface corresponding to PPA. You must be a
privileged user.
lanadmin recognizes the following Menu Mode options. They are ignored if they are given with an
Immediate Mode option.
-e Echo the input commands on the output device.
-t Suppress the display of the command menu before each command prompt. This is equivalent to the
Test Selection Mode terse command. The default is verbose.
Immediate Mode
In Immediate Mode, you can display the station address, MTU size, link speed of LAN interface
PPA/VPPA and information about VLANs on the system (see vlan (7)). For certain interfaces, if you are a
privileged user you can also modify the station address, MTU size, and link speed. See Options above.
Menu Mode
In Menu Mode, you can select an interface card, display statistics for the selected card, reset the card,
and clear the statistics registers.
Menu Mode accepts either complete command words or unique abbreviations, and no distinction is made
between uppercase and lowercase letters in commands. Multiple commands can be entered on one line if
they are separated by spaces, tabs, or commas.
Test Selection Mode Menu
This menu is entered when Menu Mode is first selected. The available Test Selection Mode commands
are:
lan Select the LAN Interface Test Mode menu.
menu Display the Test Selection Mode command menu.
quit Terminate the lanadmin program.
terse Suppress the display of command menus.
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2010