ckconfig.1 (2010 09)

ckconﬁg(1) ckconﬁg(1)

NAME

ckconﬁg - verify the path names of all the FTP conﬁguration ﬁles.

SYNOPSIS

/usr/bin/ckconfig

[-V]

DESCRIPTION

The

ckconfig utility is used to verify the path names of the FTP conﬁguration ﬁles,

/etc/ftpd/ftpusers

, /etc/ftpd/ftpaccess

, /etc/ftpd/ftpconversions

/etc/ftpd/ftpgroups

, /etc/ftpd/ftphosts

, /var/adm/syslog/xferlog

, and

/etc/ftpd/pids/*

This utility checks to see that all the FTP conﬁguration ﬁles are in the path speciﬁed. If it is not able to

ﬁnd the conﬁguration ﬁles in the path, it will give out an error message to the system administrator about

the same.

The

-V option causes the program to display copyright and version information, then terminate.

FILES

/usr/bin/ckconfig

AUTHOR

ckconfig was developed by the Washington University, St. Louis, Missouri.

PAGE 1
ckconfig(1) ckconfig(1) NAME ckconfig - verify the path names of all the FTP configuration files. SYNOPSIS /usr/bin/ckconfig [-V] DESCRIPTION The ckconfig utility is used to verify the path names of the FTP configuration files, /etc/ftpd/ftpusers, /etc/ftpd/ftpaccess, /etc/ftpd/ftpconversions, /etc/ftpd/ftpgroups, /etc/ftpd/ftphosts, /var/adm/syslog/xferlog, and /etc/ftpd/pids/*. This utility checks to see that all the FTP configuration files are in the path specified.
PAGE 2
(Notes) A (Notes) cA 2 Hewlett-Packard Company −1− HP-UX 11i Version 3: September 2010