auto_adm.4 (2012 03)

a
auto_adm(4) auto_adm(4)
where the first two words are literally
hpux KernelPrompt, and message , timeout , and default
are as defined above under the
CONF format section. This line is followed by a line containing only
the word
reset.
The image-specific section contains one or more lines of the format:
label cmd device image
with each of these terms being defined under
CONF.
Finally, the image-specific section is followed by the line:
"Exit" reboot
The
ISL-formatted file corresponding to the above
CONF file is:
hpux KernelPrompt "Choose target Operating System: " 15 2
reset
"B.11.11 32bit install" boot (;0)boot/Rel_B.11.11/INSTALL
"B.11.11 64bit install" boot (;0)boot/Rel_B.11.11/WINSTALL
"Exit" reboot
International Code Set Support
Ignite-UX uses a variety of system commands to accomplish its functionality. Because the output of many
of these commands is parsed, Ignite-UX ensures that the POSIX locale is normally used by modifying
environment variables. Help text and some command output not parsed by Ignite-UX will be left in the
user’s specified locale.
AUTHOR
auto_adm was written by Hewlett-Packard Company.
SEE ALSO
auto_adm(1M), boot(1M), hpux(1M), isl(1M), lif(4).
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: March 2012