apa.7 (2010 09)
a
apa(7) apa(7)
for information on how to use the
nwmgr command for configuring APA interfaces.
APA interfaces can also be configured and managed by using the legacy
lanadmin command for link
aggregates and by using the
lanapplyconf command for failover group. These commands are avail-
able since initial release of the product. However, starting with the HP-UX 11i V3 APA product, HP
recommends using the nwmgr command instead of using
lanadmin and lanapplyconf commands.
See the documents listed in the PRODUCT DOCUMENTATION for details on how to use these com-
mands.
PRODUCT DOCUMENTATION
For detailed information, including installation, configuration, and troubleshooting, please see the follow-
ing documents at
http://www.hp.com/go/hpux-networking-docs
:
• HP Auto Port Aggregation (APA) Administrator’s Guide
• HP Auto Port Aggregation (APA) Release Notes
WARNINGS
The
lanadmin, lanscan, and linkloop
commands are deprecated. These commands will be removed
in a future HP-UX release. HP recommends the use of replacement command nwmgr to perform all net-
work interface-related tasks.
FILES
/etc/rc.config.d/hp_apaconf
Link Aggregate configuration file
/etc/rc.config.d/hp_apaportconf
Port configuration file
/etc/lanmon/lanconfig.ascii
Failover group configuration file
AUTHORS
The Auto Port Aggregation (APA) product is developed by HP.
SEE ALSO
netstat(1), ifconfig(1M), lanadmin(1M), lanscan(1M), linkloop(1M), nwmgr(1M), nwmgr_apa(1M),
smh(1M), lan(7).
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2010