LDAP-UX Client Services B.05.01 Administrator Guide for HP directory servers and Windows ADS

The time, in seconds, before a cache entry expires from the negative
cache.
The default value is 7200 (2 hours).
[printers] Any printer setting defined here will be used by the LDAP printer
configurator.
start=<yes|no>
Determines if the printer configurator service will start when
ldapclientd is initialized. If it is enabled, the printer configurator will
start when ldapclientd is initialized. By default, the start parameter
is enabled.
search_interval=<1800-1209600>
Defines the interval, in seconds, before the printer configurator performs
a printer search in the directory server. The default value is 86400 (in
seconds). The minimum value is 1800 (30 minutes) and the maximum
value is 1209600 (2 weeks).
max_printers= 50 (default value)
Defines the maximum printer objects that printer configurator services
will handle. For example, a number of 100 printer entries is returned
to the printer configurator after a scheduled printer search. If the
max_printers value is set to 50, only the first 50 printer entries
received by the printer configurator will be processed. For this
configuration parameter, the value must be greater than 0 and the
maximum value is unlimited. The default value is 50.
lpadmin_option
Defines the lpadmin options. Do not include the-p, -orm and -orp
options in the option fields. The LDAP printer configurator provides the
required information of printer name (-p), remote machine name (-orm)
and remote printer name (-orp) during the run time. Do not include
any other parameters, such as stderr or stdout redirection options. If the
option fields of the lpadmin_option parameter are empty or the
lpadmin_option parameter does not exist, the default lpadmin
options are used. By default, lpadmin_option=-mrmodel
-v/dev/null -ocmrcmodel -osmrsmodel.
For detailed information about valid options and the syntax, see the
lpadmin manpages.
7.1.3.2 Example Configuration file
The LDAP client configuration file is automatically loaded when the product is installed. For additional
information, see the ldapclientd(4) and ldapcltd(4)manpages.
If you update LDAP-UX Client Services from an older version, such as B.03.00 or B.03.10, the
new configuration file will be /opt/ldapux/newconfig/etc/opt/ldapux/
ldapclientd.conf.
The following is a sample ldapclientd.conf configuration file. For a sample
ldapclientd.conf configuration file created when using autosetup, see Section C.4
(page 417).
#!/sbin/sh
# @(#) $Revision: 1.12 $
# ldap client daemon configuration.
#
# Please note, the below keys are case sensitive.
#
7.1 Managing the LDAP-UX client daemon 191